User manual BABYLISS ST89E

[. . . ] Thanks to the exclusive Wet N' Dry evaporation system, from now on you can use your straightener on damp hair. By using the dampness in your hair, you can straighten more deeply and thus obtain results that are even softer and silkier, and a hold that is even longer lasting. [. . . ] Clip the upper layers to the top or your head to work with the layers underneath. When using the unit for the first time, you might notice a little smoke and a distinct odour: this is common and will disappear in the following use. You will also notice that the unit sputters slightly, this sound is normal for a high output ion generator. Generally, it is recommended that you select a lower temperature for hair that is fine, bleached and/ or damaged, and a higher temperature for hair that is curly, thick and/or difficult to style. Because every hair type is different, we recommend using position 1 the first time. For following uses, you can slowly increase the Temperature Hair type Fine, bleached and/or damaged hair Normal, coloured and/or wavy hair Of hair products (leave-in hair care, spray, etc. 130°C green LED 155°C yellow LED 155°C yellow LED 180°C orange LED 180°C orange LED 205°C red LED 230°C red LED Set the style with a light mist of hairspray or a small amount of mousse, but do not brush your hair. To shape your hair The BaByliss I pro 230 Ionic Ultimate straightener can also be used to accent certain sections of hair (to straighten the fringe or create a tousled look, etc. ) · To style your hair with the ends curling under, follow the above instructions but turn the appliance inwards (as you would with a brush when blow-drying). ⷠTo have the ends curl out, use the same movement but turn the straightener outward. [. . . ] ⷠTake a section of hair about 2 to 3 cm wide and place it between the 2 heating plates close to the roots. ⷠTake a new section and repeat until you have straightened all of your hair. [. . . ]