User manual B&W ASW 825

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual B&W ASW 825. We hope that this B&W ASW 825 user guide will be useful to you.


B&W ASW 825 : Download the complete user guide (6528 Ko)

You may also download the following manuals related to this product:

   B&W ASW825 DATASHEET (132 ko)
   B&W ASW 825 DATASHEET (132 ko)

Manual abstract: user guide B&W ASW 825

Detailed instructions for use are in the User's Guide.

[. . . ] If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. When using an extension power-supply cord or a power-supply cord other than that supplied with the appliance, it should be fitted with the appropriate moulded-on plugs and carry safety approval appropriate to the country of use. Power Cord Protection ­ Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed on or against them, paying particular attention to cords at plugs, convenience receptacles and the point where they exit from the appliance. [. . . ] Corner positions often excite more low-frequency room resonances, making the bass more uneven with frequency. There is no substitute for experiment as all rooms behave differently, so try the subwoofer in a variety of positions before making a final decision. A piece of music with a bass line ascending or descending the musical scale is useful for assessing the smoothness of the bass response. Having a separate subwoofer does enable you to optimise for room resonances independently from siting the satellite speakers for best imaging. If the subwoofer is to be used in a confined space (eg in custom furniture), the space must be ventilated to allow sufficient air to circulate and cool the unit. The spikes pierce through carpet pile, giving a firm support directly to the floor surface without crushing the pile. If the unit is to be placed on a vulnerable surface, such as a wooden floor, either place a protective disc under each spike or fit the four rubber feet in place of the spikes. When fitting either the rubber feet or the spike feet, first screw the lock nuts fully onto the thread and then screw the feet fully onto the threaded inserts in the base of the cabinet. If the unit rocks, loosen the relevant two opposing feet until the support is firm, then re-tighten the lock nuts to the inserts. Check that there are no cables under the carpet that may be damaged by the spike feet. Do not walk the product on the spike feet as this may cause them to become detached from the cabinet and cause damage. Take care not to impale yourself with the spike feet when moving the product. All B&W products are designed to comply with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and Electronic Equipment (WEEE). These symbols indicate compliance and that the products must be appropriately recycled or processed in accordance with these directives. Standby: In this position, the amplifier is in permanent standby, and the light glows red. If the subwoofer is to be out of use for an extended period of time, we recommend you isolate it from the power supply, either by using the POWER switch (11) or by removing the plug from the power socket. The subwoofer may be used with any decoder that has a line-level subwoofer output (normally from an RCA Phono socket). Most decoders with integral power amplifiers still output the subwoofer or LowFrequency Effects (LFE) signal at line level. Separate pre- & power amplifiers: a b One or more subwoofers with output combined into a single mono signal ­ fig. The subwoofer is not suitable for use with 2-channel integrated pre/power amplifiers. Using more than one unit in a single installation can improve performance in the following ways: · Cope with larger listening rooms. Enable greater maximum sound output ­ often useful for effectively reproducing special effects in Home Theatre applications. [. . . ] We have chosen the finest wood veneers for the surface of the cabinet, but please be aware that, like all natural materials, the veneer will respond to its environment. Keep the product away from sources of direct heat such as radiators and warm air vents to avoid the risk of cracking. The wood is treated with an ultra-violet resistant lacquer to minimise changes in colour over time, but a degree of change is to be expected. This effect may be particularly noticeable where the area covered by the grille, or areas kept in shadow, change more slowly than other areas. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE B&W ASW 825




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual B&W ASW 825 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.