User manual AXL AKITA AT30

[. . . ] With Accutronics reverb, premium tubes in the pre-amp and power amp, and Alphatone speakers, the Akita Series have all the classic features of vintage amps with contemporary components and great options. Available with a birch plywood veneer cabinet or a blonde tolex cabinet, there's a model with the right style and power to fit your audio environment. The clean channel has a sound reminiscent of the most favored American amplifiers. [. . . ] The apparatus shall not be exposed to dripping or splashing and that no object filled with liquid, such as vases, shall be placed on the apparatus. Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Heat The product should be placed away from heat sources, such as radiators, stoves, or other products (including amplifiers) that produce heat. Safety Check Upon completion of any service repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. AA-AK-30 (Please refer to Fig. Overdrive Gain: Adjusts the signal distortion level in the Drive Channel. Use this control in conjunction with Overdrive Level (5) to adjust the loudness of the Overdrive Channel. Overdrive Level: Adjusts the volume level of Overdrive Channel. Akita AT30 · Manual 6. Turn this knob clockwise to boost the bass sound, counter clockwise to cut the bass sound accordingly. Turn this knob clockwise to boost the middle sound, counter clockwise to cut the middle sound accordingly. Turn this knob clockwise to boost the treble sound, counter clockwise to cut the treble sound accordingly. Reverb: Adjusts the amount of sound reverberation/reflection effect to the guitar's signal. Standby Switch: When this Switch is in the upward position (On), this mode keeps tubes powered-up and avoids delay times (Time it takes for tubes to warm up) for guitar players between practice sessions. Power Switch: Use this switch to turn the amplifier on or off. * * The power/mains switch is a one pole switch. The apparatus is not completely disconnected from the power/mains when turning the switch "off". The power/mains plug or appliance coupler is the disconnect device which must remain readily operable. AA-AK-30 B. Power IEC Socket: Use the included power cord with this unit in accordance with the voltage and frequency ratings listed on this manual and rear panel of this amplifier. In the event of an over power malfunction, the fuse will blow, disconnecting the power source and the amplifier, therefore preventing the amplifier from severe damage. If the amplifier shuts down while in use, unplug the amplifier, open the fuse holder, check the fuse and replace if necessary (Replaced fuse must be at the same rating voltages and current). [. . . ] The warranty shall not apply, if the product has been misused or damaged as a result of neglect, abuse, alteration, improper handling, unauthorized repair or modification, accident or causes external to the product, such as, but not limited to, excessive heat or humidity. The manufacturer's sole and exclusive maximum liability for any claim by the Purchaser shall not exceed the wholesale value of the product. In no event shall the manufacturer be liable for any indirect, incidental, collateral, exemplary, or consequential damages of losses arising out of the Purchaser's purchase of the product. [. . . ]