User manual AXESS ELECTRONICS AC8

[. . . ] Connections POWER: Accepts power from an external AC Adapter with a 5. 5mm/2. 1mm barrel connector. MIDI IN: 7pin DIN connector that receives MIDI information from an external source (such as a MIDI footcontroller) which transmits MIDI commands. [. . . ] Powered by a 9VDC Adapter (like those from Boss) with a 5. 5mm/2. 1mm barrel connector. Housed in a compact (4. 80" x 3. 75" x 1. 40") and rugged . 064" thick aluminum enclosure for years of reliable use and performance. Brushed finish with black anodize coating and laser-engraved printing. 100mA@9. 6VDC Use Boss PSA Adapter Only 5. 5mm/2. 1mm Barrel Connector Warranty This product is warranted against failures due to defective parts or faulty workmanship for a period of one year after delivery to the original owner. During this one year period, Axess Electronics will make any necessary repairs without charge for parts and labor. However, shipping charges to and from the repair location must be paid by the owner. This warranty applies only to the original owner and is not transferable. This warranty does not cover damage to the product as a result from accident or misuse. This warranty will be canceled at the sole discretion of Axess Electronics if the product has: 1. Any damage resulting from physical abuse or failure to follow the operating instructions. Axess Electronics' liability to the owner and under this warranty is limited only to the repair or replacement of the defective product. Call or write to Axess Electronics prior to shipping the product for repair. Axess Electronics reserves the right to make any changes and/or improvements to the design of this product without any obligation to include those changes in any previously manufactured units. · · · · Basic Operation Connect the MIDI IN, MIDI THRU (if necessary) and the TO AMP jack(s) to the amplifier to be controlled, followed by power last, as described in the Connections section. [. . . ] For DMC Ground Control users: GCX#2 L1 - L8 Lat. 'd = Control Change 88 - 95 GCX#2 L1 - L8 Mom. Control Value 0/Off is ignored for Control Changes 112 - 114 (Momentary). Note: When selecting channels, only one of the four Control Change messages (88 ­ 91), the one for the channel you want activated, should have a Control Value of 127/On, the other three must have a Control Value of 0/Off. Marshall Mode 4 Control Change: 88 89 90 91 92 93 Clean Crunch Overdrive 1 Overdrive 2 Solo Digital FX Note: When selecting channels, only one of the four Control Change messages (88 ­ 91), the one for the channel you want activated, should have a Control Value of 127/On, the other three must have a Control Value of 0/Off. Rivera Bonehead (FS-8) Control Change: 115 116 117 118 112 113 114 Boost 1 On/Off Boost 2 On/Off Boost 3 On/Off FX Loop On/Off Selects Channel 1 Selects Channel 2 Selects Channel 3 Bogner Ecstasy 100B Control Change: 91 92 112 113 114 Boost On/Off FX Loop On/Off Selects Channel 1 Selects Channel 2 Selects Channel 3 [. . . ]