User manual AVISION NETDELIVER @V2500

[. . . ] NetDeliver MFP User's Manual Regulatory model: DF-0605H Safety Information When using this equipment, the following safety precautions should always be followed. Safety During Operation In this manual, the following important symbols are used: WARNING: Indicates potentially hazardous situations, which if instructions are not followed, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property. Please read and follow these instructions to ensure a proper operation and to avoid damage to the machine. recommended. Reading this is highly WARNING: To avoid hazardous electric shock or fire, do not remove any covers or screws other than those specified in this manual. ii CAUTION: Disconnect the power plug by pulling the plug, not the cable. [. . . ] Repeat Step 1 to 2 from the previous chapter, Specifying the FTP folder Template by the product's Web page. Click Login since the machine is shipped with no specific login name and password, and then click Profile Manager to prompt the Profile Manager screen. 3. Click Update to permanently save all the latest change on the product, or Exit to leave without saving any latest change. 5-47 6 Setting up Account Management This chapter is specifically targeted to the persons who are responsible for the administration of the product. If you are the administrator of this product, please read this chapter before using the product. The Account Management on the product web page must be set up first if you permit someone to have limited use on the Copy, E-mail, or Filing function. The Account Management on the control panel allows you only to switch desired servers without entering the product web page again. After the administrator has set up Account Management and restarted the product or logged out due to time out, a user is required to create login name/password and quota to use the product. The access to the Account Management is blocked by the administrator password. It is recommended that an administrator create a password before performing these activities. Both Login and Password leave blank by default. 6-1 SETTING UP ACCOUNT MANAGEMENT BY THE PRODUCT'S WEB PAGE 1. Type the IP address of the product in the URL field of your browser and then press Enter. 2. (The Login button will be changed to the Logout button after you have successfully logged in. A user without privilege can modify the settings on this web page if you do not click the Logout button after finishing your settings. ) 6-2 3. Click Login since the machine is shipped with no specific login name and password, and then click Account Management to prompt the Account Management dialog box. 4. Under the Basic Settings tab, select a server type from the Type dropdown list, type in your server URL in the Server URL field, type in your server port in the Port field, and select a counter reset option from Reset Account Counter dropdown list. Finally click Update to save your settings. 6-3 Refer to the following table for the detail of each setting: Type Allow the system administrator to define the security type Choice: No, Local , HTTP, LDAP, SMTP Note: "No" means no security type is applied. "Local" means using the product as the security type, and the name and password entered in the Account management are saved in the product memory. "HTTP, LDAP, or SMTP" means using a HTTP, LDAP, or SMTP server as a security type, and a HTTP, LDAP, or SMTP server will be assumed to know the name and password entered in the account management. Enter the port number if you choose HTTP, LDAP, or SMTP as your security type. Click the Account List tab to open the Account List dialog box, as shown below. 6. Click the New Account button to open the New Account dialog box, as shown below. 7. Set up your user name and password respectively in the Name and Password fields. [. . . ] CIFS fail to connect CIFS Computer name error CIFS dialect negotiation fail CIFS (User level) login fail. 51001 51002 51003 52001 53001 54001 54002 61001 63001 63002 64000 62001 64001 62002 64002 62009 64009 CIFS (User level) can not make subdirectory CIFS fail to create Make sure you have full file. CIFS send data error HTTP fail to Check Server IP and HTTP connect port. Unpredicted error Turn on Log File option in [ADMIN / MANAGEMENT/ log action] to log and observe device actions and contact your server administrator or nearest dealer for further help. Check directory in profile and make sure it follows UNC, such as \\Computer\Share\directory. This account has not right to create new subdirectory. 10-8 63003 63004 HTTP [405] MKCOL method not allowed HTTP [501] MKCOL method not implemented HTTP [405] PUT method not allowed HTTP [500] internal server error HTTP [501] PUT method not implemented 64003 64004 64005 Contact server administrator to change permission on this privilege. [. . . ]