User manual AVIOM D-16C

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AVIOM D-16C. We hope that this AVIOM D-16C user guide will be useful to you.


AVIOM D-16C : Download the complete user guide (1135 Ko)

Manual abstract: user guide AVIOM D-16C

Detailed instructions for use are in the User's Guide.

[. . . ] · Operating Temperature: 10°C to 40°C (50°F to 105°F) CAUTION: · Using any audio system at high volume levels can cause permanent damage to your hearing. IMPORTANT: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] It can receive a standard Category 5e cable or a cable fitted with the special heavy-duty EtherCon connector. When using a standard Cat-5e cable, plug the cable into the center of the jack; release the cable by pressing on the small plastic tab built into the cable connector. The locking EtherCon connector is similar to an XLR connector, the kind commonly used on microphones. Insert the EtherCon-equipped cable into the jack until it clicks and locks in place. To remove the cable, press on the metal release tab at the top of the panel-mounted EtherCon jack and pull the connector outward. Compatibility The D-16c card is compatible with both the DiGiRack and the MiNi DiGiRack from DiGiCo as well as with any of the DiGiCo control work surfaces that support these I/O racks. The D-16c console interface card, when installed and properly configured in a DiGiCo digital mixing console system, is compatible with Aviom's Pro16 Series products including: · A-16II Personal Mixer · A-16R rack-mounted Personal Mixer · AN-16/o Output Module · A-16D A-Net Distributor · A-16D Pro A-Net Distributor Installing the D-16c Card The D-16c card can be installed in any pair of adjacent output expansion slots in the DiGiCo DiGiRack or MiNi DiGiRack. The number of available expansion slots varies with each configuration. DiGiRack slots 1 to 7 are reserved for input cards and slots 8 to 14 are reserved for output expansion cards. The MiNi DiGiRack has four available expansion slots that can be used for inputs or outputs. To install the D-16c card: · Start with the power to the DiGiCo mixing console work surface and DiGiRack off. · Follow proper grounding practices; briefly touch any metal component of the DiGiRack to discharge any built-up static charge before handling the D-16c card. · Remove the DiGiRack's power cord from the wall receptacle. · Remove the cover plates on the rear of the DiGiRack output expansion ports to expose the expansion connections. · Remove the D-16c card from its protective anti-static sleeve. · Choose a configuration method--manual or host-based (see below). · Slide the D-16c card into place, aligning the sides of the card with the support guides in the DiGiRack expansion slot. · Press the D-16c card firmly in place to attach the two multi-pin card connectors on the D-16c card to the DiGiRack. · Attach the D-16c card permanently by tightening the four thumb screws on the top and bottom of the card. Output Slots 8-14 EARTHED Note: In addition to physically installing the D-16c card in the DiGiRack expansion slots, the DiGiCo Sockets File must also be updated to reflect the change. The Sockets File contains setup and installation information for all hardware resources currently installed in the system's DiGiRack(s). Consult your DiGiCo user documentation for information about editing and maintaining the Sockets File. The DiGiCo console will not recognize the Aviom D-16c card unless it is configured as part of the Sockets File. DIP Switch The 10-position DIP switch on the D-16c card provides two separate functions. Switches 1 through 8 are used for controlling the stereo link status (used by Aviom personal monitoring devices) for the eight possible audio channel pairs. [. . . ] Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Date Purchased . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dealer Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dealer Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Your Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AVIOM D-16C




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AVIOM D-16C will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.