User manual AUSTRO FLAMM PI

[. . . ] ⷠPlacing non-heat-resistant objects on the heating unit or in the vicinity of the heating unit is forbidden. ⷠLaundry hung up to dry must be kept at a safe distance from the stove because of the danger of fire. ⷠWhen operating your heating unit it is forbidden to use flammable or explosive materials in the same or an adjacent room to the one in which your heating unit is located. [. . . ] Please have your certified retailer carry out the connection of your stove. Your stove was treated with a special environmentally friendly lacquer. The lacquer surface may not be touched when it is heated for the first time. The stove must be initially heated to a high temperature for at least 1. For this reason it will be necessary to open windows during initial operation in order let the vapors escape into the outdoors. PLEASE TAKE NOTE: It takes several heating sessions before for your stove releases only the pleasant smell of burning wood. Maximum amount of fuel to be added: 1, 3 kg wood or 1 kg wood briquettes. The wood must be dry (relative wood moisture < 15%) and untreated and the right amount of wood must be burned in order to ensure a clean fire that releases only small amounts of emissions. Figure 4: Regulate the air slider As soon as the wood logs are burning well, you can regulate the heating capacity with the air slider. (Slider set to the maximum ("AUF") setting produces maximum heat ­ see Figure 2. ) When adding wood to the fire, follow the same procedure as when igniting the fire: Open the air slider, carefully open firebox door, lay wood on the fire, close the firebox door. Then regulate the air slider again Prepare everything you need for starting the fire-- soft wood chips, igniter materials (such as Thermohit wood/coal igniter), uncoated paper, wood. Heating the stove in between seasons, when the outside temperatures are higher, the flue gases are not able to escape completely and this may lead to disturbances in the chimney draught, especially if the temperatures are rising suddenly. The stove has to be charged with less wood and the primary air has to be increased so that the wood can burn down faster (with visible flames) and thus the chimney flue can stabilize. Chimney fire may occur, due to sooting and deposits in the chimney, if wrong or humid fuel are used. Close all air inlets on the fireplace/chimney immediately and call the fire brigade. [. . . ] Steel and cast-iron components which show defect in materials or workmanship during the guarantee period shall be replaced with new components. We do not guarantee wearable components (such as Keramott, gaskets, floor grid), surface coatings, lacquer, glass and ceramics. Your AUSTROFLAMM stove was installed by a certified professional and is operated in accordance with the operator's manual. [. . . ]