User manual AUDIOVOX XR9

[. . . ] XR9 Satellite Radio Receiver User Guide SATELLITE RADIO 1 2 3 4 5 6 7 8 9 0 128-7220A 1 of 32 Released: 10-11-04 Revision A: 11-8-04. Changed default screen and updated existing memory/data screens. Congratulations You are one step closer to experiencing the latest innovation in XM Satellite Radio. XM will revolutionize your in-home or vehicle entertainment with: · Over 130 channels of original programming, including ­ 68 channels of 100% commercial-free music ­ guaranteed, Over 60 channels of world-class sports, news, talk and information. Your Audiovox XR9 receiver must be used with an adapter kit, such as the Audiovox Home Kit, Boom Box or Vehicle Kit as required by your specific installation needs. [. . . ] To exit this option, press the SELECT or MENU buttons. Main Menu Radio ID · · · · · · · Radio ID Display Setting Audio Options FM Options Confirm Tone Option Lock Option Antenna Aiming · · · · · · · Channel Add/Skip Memory Option Time Options Stock Options Info Extras Info Display Options Factory Default 36DH3084 Display Setting The following adjustments are possible: Dimming Control Contrast Control To enter any of these modes, use the CH Up/Down buttons to highlight the option you wish to adjust and press the SELECT button. Upon entering either the contrast or dimming control, a 10segment horizontal bar graph is displayed with left and right directional arrows. If, while in the menu screen function, a button is not pressed within 10 seconds from the previously selected function, the unit exits the menu screen function and reverts to the default screen display. -14- 128-7220A 14 of 32 -14- The current numerical setting (1-10) is indicated above the bar graph. Pressing the CH Up/Down buttons adjusts the bar graph indication and function accordingly. Display Setting Dimming Control 6 Audio Options Equalizer Control Volume Control Treble Bass Equalizer Control Dimming Control Contrast Control Equalizer Control Bass Audio Options The following adjustments are possible: Equalizer Control Volume Control Upon selecting this option, use the Channel Up/ Down buttons to highlight either option and press the SELECT button to enter. When Equalizer Control is selected, a dual graph appears representing Bass and Treble adjustments. Use the Channel Up/Down buttons to high light the desired function and press the Category Up/Down buttons to make the adjustment. When either settingis flat (Bass or Treble equalizer setting off) the indication will be at mid-range; any setting to the left (-) or right (+) indicates a respective decrease or increase in the Bass or Treble setting. Treble When Volume Control is selected, a 32-step (0-31) bar graph appears; adjust the volume using the CH Up/Down buttons. No button activity for 10 seconds will exit this function. Audio Options Equalizer Control Volume Control Volume Control Equalizer Setting Volume Control 16 NOTE: To prevent distortion caused by overdriving the audio playback device input, it is recommended that you adjust the volume of the XR9 at mid-range. -15- 128-7220A 15 of 32 FM Options The following adjustments are possible: NOTE: The internal wireless FM transmitter allows you to play the XR9 audio through any standard FM receiver, eliminating the need to hardwire connections. FM On/ Off Frequency Setting FM On/Off: Upon entering this mode, press the CH Up/ Down buttons to toggle between the FM ON or FM OFF function/display selection. (No button activity for 10 seconds will exit this function. ) FM Options FM On/Off Frequency Setting FM Options FM On / Off Frequency Setting Frequency Setting: Upon entering this mode, any FM transmitter frequency can be chosen using the CH Up/Down buttons for frequency selection. The FM frequency range from 88. 1 to 107. 9MHz is represented by a horizontal graph; use the Channel Up/Down buttons to select the desired frequency. Press the SELECT but Frequency Setting ton to enter the new fre 89. 3MHz quency setting, or press the MENU button to return to the menu options page with no change to frequency. Confirm Tone Option When this mode is entered, you are provided with an On or Off option whereby you can select whether or not a confirmation tone will be heard each time a preset button is pressed or an alert sounds. When the option is highlighted, press the Confirm Tone Option SELECT button to enter. On Off NOTE: It is recommended that you turn the FM Transmitter off if you are using the low level audio outputs in your particular application. -16- 128-7220A 16 of 32 Lock Option When this feature is selected, the following options appear on the display: Lock Option Lock/UnLock Edit Code Lock / Unlock Edit Code Upon entering this mode, the user is prompted to enter a four digit numerical code that is used to lock/unlock channel access. Once the code has been entered, press the SELECT button; the channel list will be displayed with the current channel in play highlighted. Use the Channel Up/Down buttons to navigate the list and highlight the channel to be adjusted. Lock Options time the user will be prompted to enter the previously stored 4-digit code. Once the correct code has been entered (SELECT), the audio begins to play. The channel returns to the locked status if the channel is changed or the vehicle/unit is turned off (or by returning to this menu and going through the same process to return the channel to the list). Lock/Unlock Default Code Function The first time the lock/unlock function is accessed, the user must enter the default lock code. Use the Channel Up/Down buttons to highlight the Lock Option and press the SELECT button. Use the Channel Up/Down buttons to highlight Edit Code and press the SELECT button. Enter new code using buttons 0-9. Lock Options Enter Code Enter Code **** Once a channel has been highlighted, pressing the SELECT button displays a check mark ( ) next to the channel and prevents the channel from being accessible during any of the tuning modes. Locked channels can be accessed only by direct channel number entry, at which -17- 128-7220A 17 of 32 Lock Options Lock Options Enter Code Enter Code **** Lock Options The current setting is indicated by number of bars in the graph. [. . . ] For optimal operation of the remote control, always aim it toward the Remote Sensor on the front panel of the main unit. -27- 128-7220A 27 of 32 Remote Control Unit 1 1 4 7 2 5 8 0 3 6 9 13 2 12 11 3 10 4 5 6 AUDIO OX 9 8 7 1. Presets 0-9 These buttons are used to directly enter a desired channel number. They are also used when entering and recalling preset channel numbers into memory. PRE Used to switch between the three preset bands A, B and C, and DIR (tuning). [. . . ]