User manual AUDIOVOX VME9311TS

[. . . ] VME9311TS MULTIMEDIA RECEIVER MANUAL/WARRANTY CARD CONTENT - Preparation - Adjustment of the Touch Screen Monitor - Installation - Controls and Indicators - Remote Control - Using the TFT Monitor - Operating Instructions - System Setup Menu - Tuner Operation - RDS Information - DVD Player Operation - DVD Setup Menu - CD/MP3/WMA Operation - iPod Operation - Troubleshooting - Specifications - Guarantee conditions, warranty card p. 67 PREPARATION Congratulations on your purchase of the Audiovox Mobile Multimedia AM/FM/DVD /iPod (not included) Receiver. It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Audiovox installed by a reputable installation shop. Features • • • • • • • • • • • • • • Single DIN Size Ultra slim slot-in DVD core mechanism 7 inch Panasonic TFT monitor Wide screen TFT display and segment LCD display Rotary volume control ISO Double-DIN chassis Light weight proprietary DVD core mechanism Wide screen (16:9) 6. 5" TFT touch screen monitor Main System 13 Watts x 4 RMS / 40 Watts x 4 Peak 160 watts total system power AM / FM RDS Tuner Supports NTSC and PAL, auto negotiation Full, Wide, Normal and Off (Standby) screen modes Motorized TFT panel has 16 precise angle adjustments via remote control or infinitely variable manual adjustment from the front panel • Over current motor protection for obstructed TFT panel • Compatible optical formats: DVD-R/RW, DVD+R/RW, CD-R/RW, CD-DA, MP3, WMA, HDCD, SVCD, VCD, MPEG (MPEG 1), MPEG 4, JPEG, MP3/ WMA files burned onto a DVD+R/RW or DVD-R/RW and Kodak Picture CD • Multi-language, multi-subtitle and multi-angle playback options • Last position memory for optical disc. 3 • Parental Lock - Uses a password and disc rating set-up to prevent unauthorized user access from display content • Audio Mute • 5-way joystick navigation • Remote control - a full function remote control • Over and under voltage protection to insure the unit operates within designed parameters • Damped DVD mechanism with 16 Mbit flash memory ESP (Electronic Shock Protection) provide smooth disc playback under the severest road conditions Tools and Supplies You will need these tools and supplies to install your Moniceiver: • Torx type, flat-head and Philips screwdrivers • Wire cutters and strippers • Tools to remove existing radio (screwdriver, socket wrench set or other tools) • Electrical tape • Crimping tool • Volt meter/test light • Crimp connections • 18 gauge wire for power connections • 16 - 18 gauge speaker wire WARNINGS! - Only connect the unit to a 12-volt power supply with proper grounding. [. . . ] When the Local function is active, “LOC” appears on the screen and a green indicator is illuminated. RDS INFORMATION Within the RDS Setup Menu (OSD) you will find the following setup possibilities. OVERVIEW OF THE RDS FUNCTION A) Notes: - RDS is only available for FM receiption - The PS function allows station names to be displayed in clear letters. SUBJECT TO TECHNICAL CHANGE 36 - Network Tracking receiption uses the PI and AF codes. AF lists up which reception frequencies at the area are broadcasting the same program and automatically changes to the best reception quality offering frequency without the need to interrupt the program by a seek function. - Traffic programmes and announcements can be automatically received using the TA features. - The station name is displayed automatically when a RDS station is received. B) AF (Alternative Frequencies / REG (Regional): RDS AF Function There are the following possible modes available: - AF off: The network tracking is deactivated. AF function changes between stations belonging to the broadcast network being received. (Can be adjusted within the RDS Setup menu) Note: When this unit is set to this mode (REG OFF), a station broadcasting a different regional program in the same network may be received at certain times. This can happen only in case of listening to regionalized programs; no malfunction!Regional mode is engaged (AF function changes between stations broadcasting the same program at all times). Regional mode shall be selected only in case of driving in certain local areas. (Can be adjusted within the RDS Setup menu) - RDS may not operate correctly in areas where no alternative station can be received. - In reception borderland of a program chain normally no alternative stations can be found. In this case also a high advanced RDS function cannot help anymore, another program- of the driving area- must be selected. - Especially in regional mode such reception borderland can be often reached. Because of possible reduced reception quality, the regional function shall be used only for driving short distances. 37 - If the RDS station does not suport AF data list or if the tuner cannot read AF data from receiption, no network tracking is possible. After turning the RDS feature on, AF can be set to become “ON” or “OFF” using the OSD menue. - AF “OFF”: When the AF switching mode is set to OFF and RDS is set to “ON”, a maximum number of 6 RDS and non-RDS channels will be stored together. - AF “ON”: When the AF switching mode is set to ON the RDS station information will only be displayed. - Illuminated AF Segment: When the AF switching mode is “ON”, the radio continually checks the AF signal strength. The interval of checking time of each AF depends on the signal strength of current station which can be anywhere from a few seconds for strong station to a few minutes for weak station. Every time a new AF is stronger than a current station, the AF will switch over to the stronger station quickly. [. . . ] Press the button (14) on the remote control or the button (18) on the joystick to return to the previous menu. Video Playback While iPod video can be viewed on the screen, you must use the iPod to control video playback options. Press the AUDIO button (5) on the remote control to access the iPod VIDEO mode. The Moniceiver will release control back to the iPod so you can select video media to be displayed on the TFT monitor. To exit VIDEO mode, press the button (14) on the remote control or MENU button on the iPod. NOTE: To transmit the video from your iPod to the screen, you must set the following options through the iPod video settings menu: TV Out = On, TV Signal = NTSC, and Widescreen = On Photo Playback While iPod photos can be viewed on the screen, you must use the iPod to control photo playback options. Press the MENU button (1) on the remote control to access the iPod PHOTO mode. [. . . ]