User manual AUDIOVOX VME 9122 TS

[. . . ] We hope you will find the instructions in this owner's manual clear and easy to follow. If you take a few minutes to look through it, you'll learn how to use all the features of your new Audiovox VME 9122 TS Mobile Multimedia Receiver for maximum enjoyment. Preparation Optional Equipment Warning Wiring Diagram Media Link Installation Anti-Theft Feature Controls and Indicators Remote Control Using the TFT Monitor Operating Instructions Multi-ZONE Operation Setup Menu Tuner Operation DVB-T Operation DVD/VCD Video Operation DVD/CD Audio Operation MP3/WMA/iPod Operation Bluetooth Operation Troubleshooting Care and Maintenance Specifications 54 55 56 57 58 59 61 62 64 67 69 71 72 77 80 81 85 87 94 98 100 101 53 Subject to technical changes PREPARATION Congratulations on your purchase of the Audiovox VME 9122 TS Mobile Multimedia Receiver. It's a good idea to read all of the instructions before beginning the installation. We recommend having your Audiovox VME 9122 TS installed by a reputable installation shop. [. . . ] Opening/Closing the TFT Video Screen Opening the TFT Screen To open the TFT video screen, press the OPEN button (1). Closing the TFT Screen Press the OPEN button (1) again to close the TFT screen. If the screen is in the "IN" position, it moves out before closing. Insert/Eject Disc Upon inserting a DVD disc, DVD mode is entered and disc play begins. NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized, the 6-digit code must be entered and/or the disc must be authorized (see "General Sub-menu Features" on page 73). You cannot insert a disc if there is already a disc in the unit or if the power is off. NOTE: DVD-R and DVD-RW will not play unless the recording session is finalized and the DVD is closed. Ejecting a Disc Press the button on the unit or remote control (35) to eject the disc. Reset the Loading Mechanism If the disc loads abnormally or an abnormal core mechanism operation occurs, press and hold the the unit or remote control (35) to reset the loading mechanism. Normal operation resumes. button (16) on Accessing DVD Mode To switch to DVD mode when a disc is already inserted, press the SRC button (6) on the front panel or remote control (8) until "DISC" appears at the bottom of the screen. Controlling Playback To access the on-screen controls, touch the screen. Touch the 1/2 button to view a second page of controls. 81 Subject to technical changes Stopping Playback Touch the stop button ( ) on the screen or press the / BAND button (20) on the remote control to stop DVD play. Pausing Playback Touch the pause button (||) on the screen (or press the >/|| button on the remote control) to suspend disc playback. Press the > button on the screen to resume disc playback. Fast Forward Playback Press the /\ button on the joystick or the >> button on the screen to fast forward. Keep pressing and releasing the button to increase the rate from "2X" to "4X", "6X", and "8X". Press the joystick enter button (18) on the remote control or touch the play button (>) to resume normal playback. Fast Reverse Playback Press the \/ joystick button or touch the << button on the screen to play the current title in fast reverse. Keep pressing and releasing the button to increase the rate from "2X" to "4X", "6X", and "8X". Press the joystick ENTER button (18) on the remote control or touch the play button (>) to resume normal playback. Slow Forward/Slow Reverse Playback Press the ||> / BAND button on the remote control to slow forward/slow reverse. Keep pressing and releasing the button to increase the slow forward rate from "2X" to "4X" and "8X" and then begin slow reverse. Repeat Playback Press the RPT button (20) on the control panel, the RPT button (7) on the remote control, or the to alter repeat mode according to the following: · DVD: Repeat Chapter, Repeat Title, Repeat Off · VCD (PBC Off): Repeat Single, Repeat Off NOTE: For VCD play, the repeat function is not available if PBC is on. [. . . ] To make a call from the Dialed Calls list, touch the number and then touch the button. The TFT will display "Cannot get dialed record" when the feature is not available. Received Calls Use the Received Calls list to view the last 10 received numbers stored on your phone. To make a call from the Received Calls list, touch the number and then touch the button. [. . . ]