User manual AUDIOVOX VE926

[. . . ] VE926 UNDER THE COUNTER 9" TV, AM/FM RADIO, TELEPHONE & DVD PLAYER OWNER'S and INSTALL MANUAL · · · · · · · · · Slot-in DVD Player & 9" TFT LCD Monitor Multi-function Remote Control Built-in Hands Free Speaker Phone Cable Ready 125 Channel TV Tuner AM/FM Radio 2 A/V Inputs Intercom Ready Internal Stereo Speakers Under Cabinet / Table Top Mounting 0 INTRODUCTION WARNING ­ To prevent fire or shock hazard, do not expose this unit to moisture. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL CAUTION USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol alerts the user to the fact that exposed "dangerous voltages" reside within this product's enclosure and contact with any of these voltages will result in electric shock. This symbol alerts the user that important and maintenance (servicing) instructions in the literature accompanying the unit. To prevent electric shock: do not use this unit's polarized ac plug with extension cords, receptacles or other outlets that prevent the units plug from being fully seated and leave any part of the blade exposed. 1 INFORMATION Installation of this equipment shall be in strict accordance with the manufacture's instructions. [. . . ] MISC REMOTE FUNCTION (20) TEL: Press this button to answer an incoming call, press again to hang up the speakerphone. (18) A/V: Press this button to select external A/V source 1 or 2. 16 OPERATION INITIAL SETUP This unit defaults to cable TV mode. When the unit is first powered on, it will detect the cable system and auto-program the TV tuner to the available stations. Please wait while the unit auto-programs before attempting to operate the unit. The unit will respond normally once the cable mode and channel search mode is concluded. CHANNEL TUNING SETUP If you are Cable TV subscriber, in addition to normal broadcast reception of VHF and UHF channels, your new TV is capable of receiving many unscrambled Cable channels without the use of a converter box. When set to one of the CATV modes (STD, HRC, or IRC) it receives CH1-CH125. NOTE: Most cable companies broadcast in STD Mode After a power interruption, the unit will go into a cable mode search (HRC, IRC, STD) and channel search mode automatically. The unit will respond normally once the cable mode and channel search mode is concluded. POSITIONING THE SCREEN Press the screen lock button and pivot the screen forward until a comfortable viewing angle is reached. Pressing the ON/OFF button on the unit or the remote will turn the system on or off. Remember to turn the unit off and pivot the screen to the closed position when not in use to prevent damage to the screen. SETTING THE TIME NOTE: All settings (except setting the presets) are performed with the VE926 turned OFF. (Check AM/PM indicator) 5) Press the ON/OFF button to return to the time display. 17 SETTING and ACTIVATING the ALARM NOTE: The VE926 must be turned "OFF" when performing the following procedure. 1) Press the SET button twice to enter the alarm mode, press the P3 button to toggle between the active and deactivated mode. NOTE: If a series of dashes appear (--: --), the Alarm is DEACTIVATED. When setting the alarm, check the AM/PM indicator to assure the proper setting. Once the alarm is set it will sound each day at the same time as long as it is activated. DEACTIVATING ALARM 1) Press the SET button twice to enter the alarm mode. The set time will disappear from the Display Window and a series of dashes (--: --) will appear, Alarm DEACTIVATED mode. NOTE: The set time will be stored in memory and can be reactivated whenever desired by performing step 1) ­ 3) of the ACTIVATING ALARM procedure. 3) Each time CH UP/DOWN button(s) is pressed it will select a different alarm tone. [. . . ] To avoid the possibility of others using the default password to set the parental level and change the password, you can record this default password in another area and delete it from this manual. Some discs can be limited depending on the age of users while some discs cannot. Load Factory To restore all of the options to the default settings select `LOAD FACTORY' using the settings. This will return all of the settings except for parental to the default password and press ENTER button (locked). 29 TECHNICAL SPECIFICATIONS GENERAL Power Supply Operating Temperature Operating Humidity Body Size Weight : AC100-240V ~50/60Hz 40watts : 0°~40°C / 32°~104°F : 10% ~ 75% : 400 X 280 X 56mm / 15. 8" x 11. 0" x 3. 25"Inches : 3. 5 Kg / 7. 72Lbs DISPLAY LCD Illumination Backlighting Life Expectancy Resolution Screen : CCFL Edge Lit Tube : 30, 000Hrs : 1920(W) X 220(H) : 9" TFT LCD (16:9) MISC TV Channels TV System Radio Frequency Range Audio output : VHF/UHF (2-69), CABLE TV (STD, IRC, HRC) 1 - 125 : NTSC : AM 530KHz ­ 1710KHz, FM 87. 5MHz ­ 107. 9MHz : 1. 2W / 8ohm (2 Speakers) 30 TROUBLESHOOTING CHECK LIST Problem Power does not turn on · · Disc fails to play · · · · · Camera angles cannot be changed · · Solution Check if the power cord is securely plugged into the wall Check if the batteries of the remote control unit are not depleted. [. . . ]