User manual AUDIOVOX VE720

[. . . ] VE720 UNDER THE COUNTER 7" TV, AM/FM RADIO and DVD PLAYER OWNER'S and INSTALL · · · · · · · Slot-in DVD Player & 9" TFT LCD Monitor Multi-function Remote Control Cable Ready 125 Channel TV Tuner AM/FM Radio 2 A/V Inputs Internal Stereo Speakers Under Cabinet / Table Top Mounting 0 INTRODUCTION WARNING ­ To prevent fire or shock hazard, do not expose this unit to moisture. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL . CAUTION USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol alerts the user to the fact that exposed "dangerous voltages" reside within this product's enclosure and contact with any of these voltages will result in electric shock. This symbol alerts the user that important and maintenance (servicing) instructions in the literature accompanying the unit. To prevent electric shock: do not use this unit's polarized ac plug with extension cords, receptacles or other outlets that prevent the units plug from being fully seated and leave any part of the blade exposed. 1 INFORMATION Installation of this equipment shall be in strict accordance with the manufacture's instructions. [. . . ] (23) MUTE: Press this button to remove all sound (++++ blinks on display window) (28) VOL+/-: Use these buttons to increase or decrease the volume. RADIO REMOTE FUNCTION (5) SEEK DN/UP: Use these buttons to advance to the next higher or lower active station. (19) AM/FM: Each time this button is pressed, the VE720 will alternate between the AM and FM radio bands. (21) CH +/-: Use these buttons to advance to the next higher or lower channel. (23) MUTE: Press this button to mute the sound (++++ blinks on display window). MISC REMOTE FUNCTION (20) TEL: Not used in this model (18) A/V: Press this button to select external A/V source 1 or 2. 15 OPERATION INITIAL SETUP This unit defaults to cable TV mode. When the unit is first powered on, it will detect the cable system and auto-program the TV tuner to the available stations. Please wait while the unit auto-programs before attempting to operate the unit. The unit will respond normally once the cable mode and channel search mode is concluded. CHANNEL TUNING SETUP If you are Cable TV subscriber, in addition to normal broadcast reception of VHF and UHF channels, your new TV is capable of receiving many unscrambled Cable channels without the use of a converter box. When set to one of the CATV modes (STD, HRC, or IRC) it receives CH1-CH125. NOTE: Most cable companies broadcast in STD Mode After a power interruption, the unit will go into a cable mode search (HRC, IRC, STD) and channel search mode automatically. The unit will respond normally once the cable mode and channel search mode is concluded. POSITIONING THE SCREEN Press the screen lock button and pivot the screen forward until a comfortable viewing angle is reached. Pressing the ON/OFF button on the unit or the remote will turn the system on or off. Remember to turn the unit off and pivot the screen to the closed position when not in use to prevent damage to the screen. SETTING THE TIME NOTE: All settings (except setting the presets) are performed with the VE720 turned OFF. (Check AM/PM indicator) 5) Press the ON/OFF button to return to the time display. 16 SETTING and ACTIVATING the ALARM NOTE: The VE720 must be turned "OFF" when performing the following procedure. 1) Press the SET button twice to enter the alarm mode, press the P3 button to toggle between the active and deactivated mode. NOTE: If a series of dashes appear (--: --), the Alarm is DEACTIVATED. When setting the alarm, check the AM/PM indicator to assure the proper setting. Once the alarm is set it will sound each day at the same time as long as it is activated. [. . . ] sign in front of a file name indicates that this is a MP3 file. NOTE: During MP3 playback, you cannot access "PLAY MODE", folders or songs. 24 PLAYING A JPEG FILE 1. You can preview the JPEG file by pressing "Play" or "ENTER". Pressing the left or right button will rotate the JPEG in that direction. When browsing the photos, you can reverse the photo horizontally by pressing the "Up" button, or you can reverse the photos vertically by pressing the "Down" button. [. . . ]