User manual AUDIOVOX VE1020

[. . . ] 10. 2" Low Profile DVD/TV/Speakerphone - DVD Player & 10. 2" TFT LCD Monitor - AM/FM Stereo Radio - Multi-Function Remote Control - Hands Free Speaker Phone Mode - Cable Ready 125 Channel Tuner - Internal Stereo Speakers - 2 A/V Inputs - Under Cabinet / Table Top Mounting - Message Record -1- INTRODUCTION WARNING ­ To prevent fire or shock hazard, do not expose this unit to moisture. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR TO BACK). USERREFER SERVICE SERVICEABLE SERVICING PERSONNEL. CAUT ION QUALIFIED This symbol is intended to alert the user to the presence of uninsured "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. TO PREVENT ELECTRIC SHOCK: DO NOT USE THIS POLARIZED AC PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. -2- INFORMATION This equipment generates and uses radio frequency energy and if not installed and used property, that is, in strict accordance with the manufacture's instructions, may cause interference to radio and found to not comply with the limited for a Class B computing device in accordance with the specifications in Subpart J of Part 15 or FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Please wait while the unit auto-programs before attempting to operate the unit. The unit will respond normally once the cable mode and channel search mode is concluded. CHANNEL TUNING SET UP In addition to normal broadcast reception of VHF and UHF channels, if you are Cable TV subscriber, your new TV is capable of receiving many unscrambled Cable channels without the use of a converter box. When set to one of the CATV modes (STD, HRC, or IRC) it receives CH1-CH125. NOTE: Most cable companies broadcast in STD Mode After a power interruption, the unit will go into a cable mode search (HRC, IRC, STD) and channel search mode automatically. The unit will respond normally once the cable mode and channel search mode is concluded. POSITIONING THE SCREEN Unlatch and pivot the screen forward until a comfortable viewing angle is reached. Pressing the ON/OFF button on the TV or the remote will turn the system on or off. Remember to turn the unit off and pivot the screen to the closed position when not in use. - 14 - SETTING THE TIME NOTE: TheVE1020 must be turned off (except when SETTING THE PRESETS). SETTING and ACTIVATING the ALARM NOTE: the VE1020 must be turned OFF when performing the following procedure. 1) Press the SET button (1) twice and VE1020 is in alarm mode indicated by "alarm". NOTE: If a series of dashes appear --:--, (DEACTIVATED mode) press the P3 button once to switch to the alarm activated mode. When setting the alarm, check the AM/PM indicator to assure the proper setting. DEACTIVATING THE ALARM 1) With the power off, press the SET button twice to enter the alarm mode. The set time disappear from the VFD and a series of dashes will appear. (--:--), Alarm DEACTIVATED mode, Alarm indicator "ALM" off). NOTE: The set times will be stored in memory and can be reactivated whenever desired by performing steps 1) - 3) of the DEACTIVATING THE ALARM procedure above. SETTING THE ALARM TONES NOTE: Alarm must be in the Activated mode and volume turned up to hear tones. 4) Press the ENTER button (small round button between arrow buttons) to select the tone. 5) When the alarm sounds, press the ON/OFF button to turn it off. - 15 - Remote Control (1) EJECT (2) DVD (3) TV (4) SETUP (5) SEEK DN, SEEKUP (6) MENU (7) FR( ) ) (8) STOP( ) (9) PREV ( (11) TITLE (12) DISPLAY (13) SUB TITLE (14) AUDIO (15) SCREEN (16) ANGLE (AP) (17) ON/OFF (18) A/V (19) AM/FM (20) TEL (21) CH+, CH(22) ENTER (23) MUTE (24) FF ( (25) SF ( (26) NEXT ( (28) VOL +/(29) SEARCH (30) REPEAT (31) A-B Repeat (32) ZOOM (33) ERASE (34) STEP (ADD) ) ) ) ) (10) Digit 0-9 Select (27) PLAY/PAUSE ( - 16 - Remote Control Functions DVD MENU (1) EJECT: Press this button to Eject and Load the disc tray. (PBC ON/OFF Function - VCD) (7) FR ( (9) PREV ( ): Fast reverse (2X, 4X, 8X, and 20X). (8) STOP (): Press this button to stop disc playback (10) Digit 0~9 Select: For direct selecting a chapter (or tack) and for password input. (13) SUBTITLE: For selecting the subtitle language (14) AUDIO: For selecting the audio language. The screen will be enlarged in the following order: TV MODE: Model (Normal)-> Mode2 (Full)->Mode3 (Zoom3)->Mode4 (Zoom1) AV, DVD, VCD MODE: Model (Full)->mode2 (Zoom3)->Mode3 (Zoom1) -> Mode4 (Normal) CDDA, MP3: MODE1 (Full->Mode2 (Zoom3->Mode3 (LCD OFF)->Mode4 (Normal) (16) ANGLE: If a DVD disc contains sequences recorded from different camera angles you can change the camera angle for playback. [. . . ] ENGLISH (DEFAULT), FRENCH, SPANISH, CHINESE, JAPANESE OFF: No subtitles are displayed. AUDIO English: Select a language for audio (where available ­ languages depend on disc). ENGLISH (DEFAULT), FRENCH, SPANISH, CHINESE, JAPANESE VIDEO Menu Use to select screen aspect ratio RATING Use to select parental rating. Parental ratings are as follows: 1))Kid Safe ­ Will play movies with no rating 1) 1 - 24 - 2))G - Will play G rated movies 2) 2 3))PG - Will play PG rated movies 3) 3 4))PG-13 - Will play PG-13 rated movies 4) 4 5))PG-R - Will play PG-R rated movies 5) 5 6))R - Will play R rated movies 6) 6 7))NC-17 - Will play NC-17 rated movies 7) 7 8))Adult - Will play Unrated rated movies 8) 8 PASSWORD: The user will be prompted to enter the Previous Password. [. . . ]