User manual AUDIOVOX TBXPAL

[. . . ] LED Channel Up/Down Numbers TV Mode ­ Red Flash DVD Mode ­ Green Flash 9. [. . . ] If "CHANNEL SKIP" is OFF: Will tune TV down by one number. 8 Recall Return to previous channel in the specific mode set in the "TUNER MODE". 9 0~9 Direct Input for channel number 2 Basic Operations 1. Power TBXPAL On 1-1 Feed the "+12VDC" power supply to TBXPAL's "POWER INPUT" socket. 5-3 Press [ MENU ] 3 time. Press [ ] or [ ] to turn the skip mode "ON" or "OFF". When skip mode is "ON", pressing [ CH+ ] or [ CH- ] will go to next or previous rd rd 2. Scan Channels and Auto-programming 3-1 Press the [ A /P ] button on the remote. Tuner will scan all channels in the "AIR" and "CATV" modes and memorize channels with PAL TV signal in the modes for "AIR" and "CATV". It takes 45 and 75 seconds to scan in the "AIR" and "CATV" modes respectively. When skip mode is "OFF", pressing [ CH+ ] or [ CH- ] will increase or decrease the channel by one. [. . . ] Connect the external IR cable and mount IR Sensor where it will be easy for viewer to use. Item 1 2 3 4 5 6 Function AUDIO-LEFT OUTPUT (RCA) AUDIO-RIGHT OUTPUT (RCA) VIDEO OUTPUT (RCA) EXTERNAL REMOTE INPUT TV ANTENNA INPUT (IEC 169-2) POWER INPUT Specification Composition Video Output Audio Output RF Input Socket TV System DC Input / Operating Range Power Consumption 1 Vp-p @ 75 ohm 0. 5 Vp-p @ 10K ohm IEC 169-2 PAL B/G, D/K, I +12VDC (10 ~ 16 VDC) 4. 8W (Max. ) 4 [. . . ]