User manual AUDIOVOX P15 Owners Manual

[. . . ] Press the pre-set button of the desired station or use any other tuning function to stop the scanning function. If you have already set the pre-set memories of that band to your favorite stations, activating the Auto-Store feature will erase those stations and enter the new strong stations. [. . . ] An auxiliary input jack is provided on the rear of this unit to accept the audio from an additional source such as a portable CD player. Connect the audio output from the source unit to the cable at the rear of the chassis using an appropriate audio patch cable (available at most radio supply stores). To select play of the source connected to the input jack, press the CD/Auxiliary Input Selector button. The indication "Cd" will appear on the display panel and the input connected to the unit will now operate through the audio system of the radio. Use the volume, balance and tone controls of the radio to adjust the sound as desired. QUID CRYSTAL DISPLAYPANEL The Liquid Crystal Display (LCD) panel displays the frequency, time and activated functions. NOTE: It is a characteristic of LCD panels that, if subjected to cold temperatures for an extended period of time, they will take longer to illuminate than under normal conditions and the visibility of the numbers on the display may decrease. The LCD read-out will return to normal when the temperature increases to a normal range. bmLI bpCD/AUXILIARYINPUTSELECTOR(CD) bnCASSETTEDOORthe exposed tape edge to the right, and Hold the cassette with insert into the tape door. When the cassette reaches the end of play, the unit will automatically change over to radio operation. -3- bqTIME/FREQUENCYSELECTOR(T/F) press this button to During radio or CD/Auxiliary Input operation, call the time display on the incorporated quartz clock. Pressing the button again or activating any tuning function (during radio operation) will return to frequency or "Cd" display. During tape operation, the time display will always be shown. SETTING THE CLOCK 1. Switch the vehicle ignition "on" and radio "off" (time display will show on the LCD panel). At the same time, turn the Manual Tuning Control to the left to adjust the hours (including "AM" or "PM" indication) or to the right to adjust the minutes. 6 bq 3. After setting the correct time, release the Time/Frequency Selector. -4- SPECIFICATIONS Size: Operating Voltage: Output Power: Output Wiring: Output Impedance: Tuning Range: Sensitivity: FM Stereo Separation: Tape Frequency Response: Tape S/N Ratio: Wow & Flutter: 7" W x 2" H x 5 1/2" D 178 mm x 50 mm x 140 mm 12 volts DC, negative ground 14 watts maximum (7 watts x 2 channels) Common-ground type design for 4 speaker use. [. . . ] ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 30 MONTHS FROM DATE OF ORIGINAL PURCHASE. [. . . ]