User manual AUDIOVOX MSR4500

[. . . ] We hope you will find the instructions in this owner's manual clear and easy to follow. If you take a few minutes to look through it, you'll learn how to use all the features of your new JENSEN / Sirius MSR4500 satellite radio for maximum enjoyment. It's a good idea to read all of the instructions before you begin the installation. It's a good idea to read all of the instructions before you begin the installation. [. . . ] Press and hold the the up (>>) or down (<<) tuning button for more than three seconds, then continue to hold to seek up or down through all categories. Use manual tuning to move through channels one at a time in either direct or category mode. Use manual tuning to move through channels one at a time in either direct or category mode. Press the up (>>) or down (<<) tuning button momentarily to select the next sequential channel. Press the up (>>) or down (<<) tuning button momentarily to select the next sequential channel. Press the up (>>) or down (<<) tuning button momentarily to select the next sequential channel. Note: In category mode, manual tuning is only used to select a channel within the current category. Press the up (>>) or down (<<) tuning button momentarily to select the next sequential channel. Note: In category mode, manual tuning is only used to select a channel within the current category. Press SEL (also the Scan button), then enter the desired channel number using the number buttons (0-9). Press SEL (also the Scan button), then enter the desired channel number using the number buttons (0-9). In direct mode, the scan function will scan up through all channels sequentially and provide five seconds of listening time before moving to the next channel. In direct mode, the scan function will scan up through all channels sequentially and provide five seconds of listening time before moving to the next channel. Tune quickly up or down through available categories Tuning Method Seek Tuning Direct Mode Tune quickly up or down through available channels Category Mode Tune quickly up or down through available categories Tune quickly up or down through available channels Tune up or down through all available Tune up or down through all available channels within the current category channels one at a time one at a time Tune directly to a channel by entering the channel number Tune up through all channels sequentially, providing five seconds of listening at each channel N/A Tune up or down through all available Tune up or down through all available channels one at a time channels within the current category one at a time Tune directly to a channel by entering N/A the channel number Tune up through all channels sequentially, providing five seconds of N/A listening at each channel Up to 20 channels and 20 categories can be stored in memory for quick recall using the number buttons (0-9). When a preset is stored, "Preset ##" will appear in the display for two seconds. Up to 20 channels and 20 categories can be stored in memory for quick recall using the number buttons (0-9). When a preset is stored, "Preset ##" will appear in the display for two seconds. Once preset channels and categories are stored into memory, they can be quickly and automatically accessed by pressing the corresponding preset number button. Once preset channels and categories are stored into memory, they can be quickly and automatically accessed by pressing the corresponding preset number button. To recall a single-digit preset (1-9), press the desired preset number button for less than three seconds to access the corresponding channel. To recall a double-digit preset (10-20), press the first digit of the desired preset number (1 or 2) momentarily, then press the second digit (0-9) momentarily to access the selected channel. When entering a double-digit preset, the second digit must be entered within three seconds of the first or the function will time out. [. . . ] if the selected disk is not in the changer , "No Disk" appears in the display. Note: Depending on the CD changer, if selected disc tray is empty, the CD changer may either advance to the next disc or revert back to the previous disc. the PROGRAM icon will flash on the display when program mode is accessed. Program up to 32 CD tracks to play in any order by selecting a track for each spot in the playing sequence. [. . . ]