User manual AUDIOVOX MSR4115

[. . . ] Carefully cut and remove a rectangularshaped section of the dashboard using the rectangular opening on the inside of the mounting paper as a template. Drill four mounting holes using the four holes in the corners of the mounting paper as a template. Using the glue paper provided, affix the two mounting brackets to the back of the dashboard, taking care to align the screw holes of the brackets with the mounting holes on the dashboard. Open the two sections of rubber covering on the left and right sides of the radio face to reveal the openings for the screws. [. . . ] Press CHANNEL << or CHANNEL >> for more than three seconds to enter manual tuning mode. When "MANUAL" appears on the display, press CHANNEL << or CHANNEL >> to move the radio frequency up or down one step. To automatically select ten strong stations and store them in the current band, select a band (if needed) and press AS/PS (16) for more than three seconds. The 10 strongest stations are stored as presets, replacing any preset stations already stored in that band. Press AS/PS again to stop scanning when the desired station is reached. After accessing the weather band, momentarily press CHANNEL << or CHANNEL >> to move to the next or previous of the seven available channels. While in Sirius mode, navigate the three options in the user-preset channel group by momentarily pressing BAND/ENTER (19). Press AS/PS (20) to search for each user preset channel from SR1 to SR2 to SR3 and stop at each available channel for five seconds. Momentarily press CHANNEL << (21a) or CHANNEL >> (21b) to move to the previous or next channel. To store favorite channels for quick access, select the desired channel, then press and hold the desired preset button (1-10) (22) for more than three seconds until the corresponding number appears in the display. While in Sirius satellite radio mode, press S-MOD (23a) (also the SHIFT/SCAN button) to select from four available modes: Normal, Category, Direct Tune and Set Skip Channel. When the Category or Set Skip Channel modes are selected, the corresponding icon appears in the display. To search the available music categories, access category mode and press CATEGORY (23b) or CATEGORY (23c) to scroll through the available category options. When the desired category is found, search for a specific channel by momentarily pressing CHANNEL << or CHANNEL >>. When the desired channel is found, press BAND/ENTER to access the channel. When direct tune mode is accessed, "000" will appear in the display with the digit representing the "hundreds" value flashing. Press BAND/ENTER to access the station, or the unit will search automatically after several seconds. Display the 12-digit Sirius ID number by pressing BAND/ENTER immediately after entering Direct Tune mode (while "000" appears in the display). When the desired channel is found, press BAND/ENTER to confirm and the "SKIP" icon will flash in the display. When finished, press S-MOD to return to normal mode, or the unit will automatically revert to normal in 10 seconds. Note: While skipped channels will be skipped during channel searches, they can be accessed during channel selection by pressing CHANNEL << or CHANNEL >>. Display the disc slot by pressing the hook (24) of the plastic disc cover then pulling it down slightly to open the cover and expose the disc slot. [. . . ] To select the desired disc for play, press SHIFT/SCAN (34) to enter shift mode, and "SHIFT" will appear on the display. Press CHANNEL << or CHANNEL >> select the previous or next disc, or use the numbered buttons (0-9) to select the disc number directly. If there is no disc loaded in the selected spot, "NO CD" will appear on the display. Pause, Track Select, Direct Track Access, Repeat, Random Shuffle, Preview Scan and Track Time Display features during CDC operation are accessed using the same methods as for regular disc play. [. . . ]