User manual AUDIOVOX MS1500

[. . . ] In addition, the visibility of the numbers on the LCD may decrease slightly. The LCD display will return to normal when temperature increases to a normal range. Mode (MODE) ¶Ë Press MODE(Radio/CD Play/CD Changer/Aux) to select a different mode of operation as indicated on the display panel. During CD player operation, pressing MODE will change to radio mode without ejecting the disc. [. . . ] 2. Press the volume buttons up or down to adjust Treble from -10 to +10. The treble level will be shown on the display for five seconds or until another function is activated. Balance 1. Press SEL four times until "BAL" appears in the display. 2. Press volume buttons up (right) or down (left) to adjust Balance between the right and leftspeakers from BAL 10R to BAL 10L. "BALL=R" represents an equal balance level between the right and left speakers. The balance position will be shown on the display for five seconds or until another function isactivated. Fader 1. Press SEL five times until "FAD" appears in the display. 2. Press volume buttons up (front) or down (rear) to adjust Fader between the front and rear speakers from FAD 10F to FAD 10R. "FAD F=R" represents an equal balance between the front and rear speakers. 4 5 RADIO OPERATION Seek Tuning ¶Â¶ Press the up or down tuning button momentarily to seek the next strong station in the current band. Manual Tuning ¶Â¶ 1. Press the up or down tuning buttons for more than two seconds to select manual tuning mode. 2. Press the up or down tuning buttons momentarily to move radio frequency up or down one step at a time. 3. Press and hold the up or down tuning buttons to quickly advance to a certain frequency. If manual tuning is not adjusted for five seconds, the unit will return to Seek tuning mode. Band ¶Ò Press BAND to change during radio play to switch between three FM bands and one AM band. "F1", "F2", "F3", or "AM" will appear in the display momentarily to indicate which band is currently selected. frequency spacing is the default, and a switch on the bottom of the chassis allows a change to European spacing. Slide the switch to the desired setting using a small screwdriver blade, then press RESET to activate the change. Store and Recall a Station ¶Ú¶ Û ¶ Ù ¶^ ¶~ ¶i Up to 24 stations (six on each band) can be stored as presets. This radio contains special circuitry which does not require a voltage source connected to the radio to maintain memories. 2 Press and hold the desired preset button (one through six) for more than two seconds. When stored, the unit will beep, and the preset number will appear in the display. The station is now stored and can be re-called at any time by momentarly pressing the corresponding preset button. [. . . ] Press and hold the button to advance quickly in the forward direction or press and hold the button to advance rapidly in the backward direction. During search operation, the rotation disc symbol will turn faster and the appropriate symbol or will flash on the LCD panel. When the Track Up is held and end of the last track is reached, or the Track Down is held and the unit reaches the beginning of the first track on the disc, the unit will enter the Pause mode until the button is released. DISC UP/DOWN BUTTON ¶^ ¶~ Press the DISC select button to select the desired disc for play as shown on the LCD panel. [. . . ]