User manual AUDIOVOX LCM1511WTV

[. . . ] Power Off- The monitor screen will be dark, the green power light will change to orange. 2-2 Input Signal Detection Tuner system will detect if a signal is received or if a signal is not received in every mode of signal input. 2-3 Contrast/Color/Brightness Adjustment If you want to adjust contrast/Color/Brightness, press the appropriate button. The screen will display the one you choose, then use t or s Volume to adjust it within 2. 5 seconds. [. . . ] PC (-)Off On(+) (+) (+) (+) R(+) (+) (+) R(+) Down(+) Wide(+) Wide(+) On(+) On(+) Auto Detect, AV Priority 1st Auto Detect, PC Priority 1st Only AV Only PC Sharpen/Soften Image Note Filter System (A/V) 1. PAL 4. 43 / SECAM (-)Off Select + Menu On(+) Reset to factory setting Press Select First Reset- Default PWROn/Off Page 5 4. Feature Functions 4-1 No Signal Detection The monitor will detect signal input automatically. If the signal source is OFF or removed, there is a" " icon that will appear and blink on the upper right corner of the screen that means "No Signal Input". The system will go to power saving mode when there is no signal input for 1 minute. 4-2 Auto Memory Function All of the functions adjustments, will be saved automatically. If you want to change back to the default setting, please use in the OSD menu to reset everything back to the factory setting. 4-3 PC VGA Multi-Sync Mode All available modes are listed below: Display Mode 350 400 Text VGA Resolution 640 x 350 @ 85 640 x 400 @ 85 720 x 400 @ 70 720 x 400 @ 85 640 x 480 @ 60 640 x 480 @ 73 640 x 480 @ 75 640 x 480 @ 85 800 x 600 @ 56 800 x 600 @ 60 800 x 600 @ 72 800 x 600 @ 75 800 x 600 @ 85 1024 x 768 @ 60 1024 x 768 @ 70 1024 x 768 @ 75 1024 x 768 @ 85 H. Frequency (KHz) 37. 861 37. 861 31. 5 37. 927 31. 469 37. 861 37. 5 43. 269 35. 156 37. 879 48. 077 46. 875 53. 674 48. 363 56. 476 60. 023 68. 677 V. Frequency (Hz) 85. 098 85. 08 70 85. 039 59. 94 72. 809 75 85. 008 56. 25 60. 317 72 75 85. 061 60. 004 70. 069 75. 029 84. 997 Dot Clock (MHz) 31. 5 31. 5 28 35. 5 25. 175 31. 5 31. 5 36 36 40 50 49. 5 56. 25 65 75 78. 75 94. 5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 SVGA XGA NOTE: 15. 1" Panel resolution is up to XGA. Page 6 5. Tuner Functions: (Performed only by IR Remote) 5-1 Power Press and hold the POWER On/Off button on the IR remote controller unit the system turns ON. Power-On: The LCD monitor will light up, and the green LED on the front panel of the monitor will be On. The On Screen Display (OSD) will show the last position where you turned the unit Off. 38, then turn the power OFF, the next time you power up the screen will display CATV Ch. Turning OFF power: The monitor screen will be dark and the indicator will turn orange. 5-2 TV/CATV/AV1/AV2 Mode Selection Use the TV/CATV button to switch between TV/CATV/AV1/AV2. System US-181 (NTSC) PAL/DK PAL/BG PAL/AI JAPAN Air Cable TV Channels 2~69 Cable TV Channels 1~57 Cable TV Channels 2 ~69 Cable TV Channels 21 ~ 69 Cable TV Channels 1 ~ 62 CATV Cable TV Channels 2 ~ 125 Cable TV Channels 1 ~ 63 Cable TV Channels 1 ~ 57 Cable TV Channels 1 ~ 53 Cable TV Channels 1 ~ 63 Mode source Description AV1 External Audio and Video Input 1 AV2 External Audio and Video Input 2 NOTE: First press of the TV/AV button, system will display status only. Button, the tuner will start to scan all of the available channels and put the active ones into memory. The screen will display "AUTO" in the lower left corner while the unit is programming. NOTE: If you want to interrupt the auto programming mode, just press the Channel s or t button. We recommend you DO NOT interrupt the auto programming mode, because it will not program in all of the channels and some available channels may therefore be missed. [. . . ] The "Mute" message on the upper right corner will disappear. Page 8 6. Installation of Monitor and Tuner Pack Monitor Rear View VGA Input DC 12V In AUX A/V Interface Cable 12V Power cable Note: Filtering device inside for automotive use. Antenna or Cable Connection To VCP/DVD Tuner/Rear View A/V Output To second Video Monitor (not required) L/R Audio to external amplifier Page 9 7. Installation Procedure The monitor is furnished with a metal bracket consisting of 8 mounting holes, located in corners of the flange. [. . . ]