User manual AUDIOVOX LCM1041TV

[. . . ] The LCM1041TV has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product and to ensure that you obtain the best results from your equipment. Please note: Installation options vary, see the individual owner's manuals for each component in your system to obtain a full understanding of each component's operation. Safety Precaution For safety reasons, when changing video tapes it is recommended that the vehicle is not in motion, and that you do not allow children to unfasten seat belts to change tapes or make adjustments to the system. System adjustments can be accomplished using the remote control unit, while seat belts remain fastened. [. . . ] SKIP / SEARCH BUTTON This button selects between SKIP and SEARCH mode. In "SKIP mode" the TV only stops on channels that are programmed into memory when the CHANNEL UP/DOWN buttons are used. When SKIP is turned off, the TV will only stop on all active channels. ERASE / WRITE BUTTON When tuned to a channel, press this button to store or erase the channel from memory. The stored channel numbers are displayed in green on the screen, and the non-stored channels are in red. When skip mode is on, the LCM1041TV will tune to only the stored channels when using the CHANNEL UP/DOWN buttons. AUTO PROGRAM BUTTON When the AUTO PROGRAM button is pressed, the TV screen will show an important information screen and all the channel numbers for TV will be scanned. When the AUTO PROGRAM button is pressed, the TV screen will show an IMPORTANT information screen, all the channel numbers for TV or CABLE TV will be scanned. The broadcasting signals will be detected and automatically stored. REMOTE CONTROLLED VCP FUNCTIONS These features can only be used with a Flexvision Video Cassette Player, if this option was installed with your video package. "REW" REWIND BUTTON If this button is pushed while the tape is stopped, the tape will rewind. If this button is pushed while the tape is playing, the VCP will go into rewind search mode. PLAY BUTTON Press this button to activate play mode while a tape is loaded into the VCP. "FFWD" FAST FORWARD BUTTON If this button is pushed while the tape is stopped, tape will fast forward. If this button is pressed while the tape is playing, the VCP will go into fast forward search mode. For more information on the search feature of the VCP, consult the VCP owner's manual. REPLAY BUTTON During playback, press this button to rewind the tape to the beginning and to begin PLAY mode from there. CHANNEL TUNING SETUP In order to easily access all available channels, it may be necessary to perform channel autoprogramming whenever the vehicle's geographic location has changed, i. e. The built-in microprocessor will automatically note each channel that is actively broadcasting in your area. (A) To tune only strong clear channels with the CHANNEL UP/DOWN buttons, press the SKIP/SEARCH button on the Remote Control Unit until "SKIP MODE ON" is displayed on the bottom of the screen. The TV will now tune only to strong active channels when the CHANNEL UP/DOWN buttons are used on the monitor or the remote control. (B) To tune to weak or marginal channels with the CHANNEL UP/DOWN buttons, press the SKIP/SEARCH button on the Remote Control Unit until "SKIP MODE OFF" is displayed on the bottom of the screen. Tune to the desired channel using the CHANNEL UP/DOWN buttons or go directly to the channel by using the 0-9 buttons on the Remote Control. To ERASE a channel, press the ERASE/WRITE button on the Remote Control Unit until "MANUAL MEMORY XX ERASE" is displayed on screen. [. . . ] These inputs are provided to facilitate the temporary connection of optional audio/video equipment, such as a camcorder or video game system. To play a source with these inputs, an RCA patch cord is required to connect the audio/video signals to their respective jacks. Mono audio sources will require the use of an RCA Y-cable (P/N 0892165) to connect to both right and left inputs. If patch cords are installed into the AUX inputs, the AUX INPUT 2 will be temporarily bypassed. [. . . ]