User manual AUDIOVOX FTS 100

[. . . ] Please read the following information carefully before starting to use your FTS 100. There must be a minimum gap of 10 cm between objects to the side, to the rear and above the device. [. . . ] INPUT MODE Press the INPUT button on the front of the device and choose between AUX1, AUX2 and AUX3. You can select these inputs directly by using the AUX buttons (1, 2, 3) on the remote control. VOLUME CONTROL You can use the MASTER VOLUME controller on the front of the FTS 100 or the VOL (+/-) buttons on the remote control. The volume of the subwoofer can be adjusted by using the SUB VOLUME (+/-) buttons on the remote control. MUTE If you press the MUTE button on the front or on the remote control, the sound of the FTS 100 will be muted. Pressing one of these buttons again will deactivate the mute function. SETTING THE TIME If you press the SET button on the remote control, the hours will start to flash. You can now set the correct time by using the "5 Pressing the SET button again " "6 " buttons. Will make the minutes start to flash; use the same method to set the minutes. If distortions occur at high volumes, decrease the volume on the device by using the MASTER VOLUME controller; doing this will prevent causing damage to the amplifier or the speakers. [. . . ] Equipments which have beenrepaired incorrectly or modified or where the case has been opened by persons other than us. Reimbursement of costs, without our prior consent, when repairing damages by third parties. [. . . ]