User manual AUDIOVOX FPE1078

[. . . ] Operating Instructions Model No. : FPE1078 7. 7" LCD TV/DVD Player For assistance, please call: 1-800-645-4994 Or Visit us at http://www. audiovox. com 1287367A Thank you. For your own safety and in order to learn all about the functions available, please read this manual and keep it for future reference. Note: An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in "park" or when the vehicle's parking brake is applied. An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the parking brake is not applied must be installed to the rear of the driver's seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. Note: This product incorporates copyright protection technology that is protected by method claims of certain U. S. [. . . ] Reading SD (Secure Digital) and MMC (Multimedia) Card You can enjoy high-quality pictures , music and cinema stored in a SD card. Press "DVD/TV/AUX" until the word "DVD" appears on the top right. Press "SD/DVD" unit the word "SD" appears on the screen display; 3. Insert the SD card into the SD slot on the left side of the unit and the unit will read it automatically. Press "DVD/TV/AUX" until the word "DVD" appears on the top right of the screen. ; 2. Insert the disk in the right side of the unit with label facing to you. Then the disk will be pulled into the unit and play will begin automatically. DVD discs will usually show a menu to choose from. Highlight the desired menu item and press the ENTER button to activate it. But if you press the STOP button again the unit will stop and not recall the last position of playback. If this symbol appears on the screen during operation, the function requested is not supported by the media type inserted. Volume: The Volume +/- is on the top of the unit. Then press Volume +/- to adjust it. 16 Display Press the "DISPLAY" button. You can change all the items (except ) in the table with r and ENTER buttons if the functions are included in the disk. 1/17 2/32 0:01:45 1. ENG D 3/21 OFF 1/1 Normal DVD Camera Angles The movies on some DVDs have been recorded from various camera positions. This feature lets you enjoy the same scene from different perspectives. When playing a DVD, that provides various camera angles, the different views are displayed simultaneously on the screen. Then press the DISPLAY button and r until the desired perspective is choose the Angle. In the upper right corner you see the number of the current/maximum number of angles. 17 Titles and Chapters During DVD playback you can skip through the DVD to certain chapters. EN G D Ent er t he Chapt er N ber di r ect l y um the desired chapter number directly. (Refer to the illustration to the right "Display Mode" ) 3/ 21 O FF 1/ 1 Nm or al Skip & Search Press , to playback the beginning of the previous or next chapter (DVD) or audio track (CD). To protect the screen, a screen saver (a flying DVD symbol) appears after several minutes that picture is paused. Still Picture These buttons activate a backward and forward search mode . Depending on how often you press the button, playback speed increases to 2x, 4x, 16 or 100 times and the audio is muted. Press the PLAY button to resume playback at normal speed with audio. 18 Playback Speeds Press the [FF ] [REW ] REW or FF ( ) buttons repeatedly to select the fast forward or reverse play speeds during playback. [. . . ] Then enter new password input page " digital password you'd like. Press " and enter 4 other ENTER to confirm and you have change the password successfully. Press the or button to select the rating levels and press the ENTER to confirm your selection. Press the button, "Load Default" is highlighted. OTHERS Loa d Default Sc reen Sav er Las t Mem ory > S e lec t > On > On 4. [. . . ]