User manual AUDIOVOX CE550DV

[. . . ] SAFETY PRECAUTIONS The following mark and symbols are located on the bottom of the unit. The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner manual. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION AVIS WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT. [. . . ] Some sources marked Dolby Digital may be recorded in Dolby Surround, a 2 channel system. Look for this logo on your unit. Manufactured under license from Dolby Laboratories. 'Dolby' and the double-D symbol are registered trademarks of Dolby Laboratories. 15 DVD CD Basic playback PLAYING A DISC This owner's manual explains the basic instructions of this unit. Some DVD discs are produced in a manner that allows specific or limited operation during playback. A " " means that the desired operation is not permitted by the unit or disc. Playing a Disc 1. Press the STD. BY/ON button on the unit or press the STANDBY/ON button on the remote control to turn on the unit. See CUSTOMIZING THE FUNCTION SETTINGS (page 27 to 29) before proceeding to step 3. Hold the disc by its sides and carefully make it fit onto the central support of compartment with the printed side facing towards you until you hear a "click". After loading, for some discs, the unit will automatically start playing most discs. If the disc does not start automatically, press the NOTE: With its printed side facing outward, gently push the disc onto the center pivot until it clicks and is held in place securely. Pausing playback (still mode) Press the PAUSE button to hold still of a playing disc. To resume normal playback, press the PLAY button. Stopping playback Press the STOP button at the location where you want to interrupt playback. To resume playback at the position where the disc was stopped, press the PLAY button again. If you press the STOP button twice, the unit's memory will be cleared and pressing the PLAY button will reset the disc to the beginning. To skip to a different track Press the PREV button on the remote once to skip to the start of the previous track. For audio CD disc, use the number buttons (remote control only) to jump straight to the desired track number. 16 (continued on next page) DVD CD Basic playback PLAYING A DISC DVD CD The speed of fast scan Fast Forward/Fast Reverse or button when a disc is playing. Each time or button is pressed, the speed of fast scan changes in the following sequence: x2 x4 x8 x 20 2. Press the speed. PLAY button when you reach the desired point to resume playback at normal Slow-motion play DVD CD SLOW button on the remote in the play mode. Each time SLOW button is pressed, the speed of slow-motion playback changes in the following sequence: 1/2 1/4 2. Press the PLAY button to return to the normal playback speed. DVD CD SKIP (Forward /Reverse) While you are playing a disc, press the NEXT button of the remote or SKIP button on the front of unit to move to the beginning of the next chapter or track. Press the PREV button of the remote or SKIP button on the front of unit to move to the previous chapter or track and automatically start playing it. Zooming into an image DVD CD While a disc is playing, press the ZOOM button. While an image is zoomed, you can use , , and button to shift the view and display the part you want. To return to the normal view, press the ZOOM button until the " " symbol shows. The screen will return to normal. Press the ZOOM button Press Press Press Press When you reach the edge of the image, the display will not shift anymore in that direction. 17 (continued on next page) DVD PLAYING A DISC Angle selection Some DVDs contain scenes which have been shot from a number of different angles. [. . . ] Some wide-screen DVDs that do not permit Pan Scan mode playback are automatically played in letterbox mode (black bands top and bottom). Letter Box When wide-screen video is played in this mode on a conventional screen, black bands appear at the top and bottom of the screen. Wide-screen This is the correct mode for playing wide-screen videos on a widescreen. Therefore the playback picture of some DVD discs may not conform to the picture size you select. When you play DVD discs recorded in the 4:3 aspect ratio, the playback ptcture will always appears in the 4:3 aspect ratio regardless of the TV shape setting. Off : Picture will be returned to default setting. AUDIO setting This setting affects the output of the Digital Out audio connector and to obtain expansive virtual surround sound effects from just two speakers. [. . . ]