Detailed instructions for use are in the User's Guide.
[. . . ] --
CD
MICRO
SYSTEM
0;' :0; f , 1 °i
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
-, . ". . ~
. &:. Th
a is containsproduct low power
laser
device.
FCC INFORMATION This device complies with Part 15 of FCC Rules. Operations is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation.
~
". =-, :C', "~:'~ !
ON PLACEMENT . Do not use the unit in places which are extremely hot, cold, dusty, or humid. . Place the unit on a flat and even surface. Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a cloth, or by placing it on a carpet ON AC VOLTAGE . Before use, check that the rated voltage of your unit matches your local voltage.
ON SAFETY . When connecting and disconnecting the AC cord, grip the plug and not the cord itself. [. . . ] I~ tTAPE STD-8V 1!)
TO STOP PLAYBACK Press the STOP I EJECT button. To resume play, press the" button again.
TO FAST WIND Press Ihe ~ REWIND
or ~
F. FWD
button.
Press Ihe . /~ STOP I EJECT button 10 slOp winding allhe desired posllion. PAUSE
. USE
ONLY NORMAL
(TYPE I) TAPES
FOR RECORDING.
TO STOP RECORDING Press the . , ~ STOP/EJECT
button.
TO ERASE A RECORDED TAPE 1. RECORD button to start
TO INTERRUPT RECORDING Press the II PAUSE button. To resume recording, press the II PAUSE button again.
8
"
, ~: -, '. '
. STOP ~~ SKIP
HI
PLAY/PAUSE
PROGRAM
REPEAT ONE/All
INSTALLING BATTERIES Install two 1. 5V , RO3 (AAA or SUM-4) size batteries into the battery compartment Controller. BATTERY REPLACEMENT When batteries become weak, the operating distance of the Remote Controller reduced and the batteries will need to be repiaced.
of the Remote
will be greatiy
USING THE REMOTE CONTROLLER CORRECTLY Point the Remote Controller at the REMOTE SENSOR located to the right of the CD dispiay window. The functions of the buttons are is the same as those on the main unit. When there is a strong ambient light source, the performance of the infrared REMOTE SENSOR may be degraded, causing unreiiable operation. NOTE If the Remote Controller is not to be used for a iong lime, remove the batteries possibie damage due to battery ieakage. Do not mix different Iypes of battery, or oid batteries with new ones.
to prevent
9
~
CLEANING CD If the CD skips or cannot be played, the disc may need cleaning. Before playing, wipe the disc from the center out with a cleaning cloth. CLEANING THE TAPE HEADS To maintain optimum sound quality, clean the playback/record heads (a), erasure head (b), pinch rollers (c), and capstans (d) regularly (every 10 hours of use), using a cotton swab lightly moistened with cleaning fluid or denatured alcohol.
IMPORTANT NOTE: If an abnormal display indication or an operating problem occurs, disconnect the AC power cord and remove the batteries. Wait at leastSseconds, then reconnect the AC power cord or reinstall the batteries.
CLEANING
THE
UNIT ,
Do not use volatile chemicals on this unit. Clean by lightly wiping with a soft cloth.
PROBLEM No power supply
The cassette cannot be inserted. [. . . ] 500 -200 rpm/CLV
FM: AM: FM: AM:
88- 108 MHz 530 -1700 kHz Telescopic antenna Built-in ferrite bar
SPEAKER SECTION Cabinet type: Speakers: Impedance: Allowable max. input: Dimensions(W x H x D): Weight (approx. ):
Bass reflex type 102 mm (4 in. ) cone type speaker 8 ohms 3W (152 x 231 x 163 mm) x 2 0. 74 kg x 2
GENERAL Power output: Power consumption:
Unit dimensions(W x H x D): Unit weight (approx. ): Accessories:
10% T. H. D. size or UM-1 batteries) 183 x 208 x 236 mm(W x D x H) 2. 4 kg (not included batteries) AC power cord
Specifications
;~ ', : , ii;
subject to change without
notice.
tii " j"
Printed in China 811-8682~70 [. . . ]