User manual AUDIOVOX CE112AR

[. . . ] Do not put any foreign objects in the DC IN 6V (external power input) jack. Should any solid objects or liquid fall into the unit, disconnect the power supply and have the unit checked by qualified personnel before operating it any further. On operation Since the CD system offers a wide dynamic range, the peaks of the high level inputs are recorded with high fidelity, and the noise level is very low. Do not turn up the volume while listening to a part of the disc with no audio signals or very low level Inputs. [. . . ] -When the unit is not to be used for a long period of time, remove the batteries. Notes on CJ -During playback (batteries are in use), CJ is off. -When the battery voltage level is low, CJ will light for approx. -Playback would automatically come to a stop when the batteries have no more power. Do not repeat pressing . . II as the unit may operate incorrectly. USING ON HOUSE CURRENT If the unit you purchased does not include an AC power adaptor, please use a 6V 450mA AC power adaptor. When the unit is not to be used, be sure to disconnect the AC power adaptor. Insert two size M RECHARGEABLE BATTERIES according to the -Ej;)- and . 8. Doing so can cause the performance of the rechargeable batteries to deteriorate. More time may be required for charging in cold temperatures. -Replace the rechargeable batteries if the operating time decreases drastically even when they are proper1y charged. ALWAYS MAKE SURE THE CHARGE SWITCH IS IN THE . OFF- POSITION WHEN USING WITH NORMAL BATTERIES. 1. Insert the CD with the printed side facing upwards and push the disc gently until it clicks so that the disc fits into the pivot. the display window shows:I -" \ 111. . I . ';, 0; . 7, 1 J [ I . n fU 1 J --. , . . [ l n U . 1 i J Total number of tracks Rrst track playing begins During play The track number of the current selection appears. When "POWER OFF I STOP. " is pressed during play, total number of tracks on the disc will be displayed and the unit is still on. The unit will be returned to full stop mode automatically after approximately 30 seconds if no button is played again within the 30 seconds. During pause The playing track number flashes. I \ \ IJ / - Pause track mode of the second When no disc is inserted onto the player and when. or reset the player by pressing "STOP" once and then insert a disc to start playing. During playback, every time the PLAY MODE key is pressed, the mode would be changed to the next one as follows: NORMAL play -> INTRO -> SINGLE MUSIC -> SHUFFLE -> PROGRAM . Repeat play of each mode is possible. Normal Pla~ -Pla~lng the Whole Disc The CD is played once from beginning to end. Intra Pla~ -Pla~lng the First About Ten seconds of All the Selections 1. [. . . ] Use alkaline batteries Display window shows "Er" error message and the unit cannot be operated:. No disc, dirty disc or scratched disc. The unit will return to full stop mode after approx. 30 seconds, or reset the player by pressing . STOP" once and then insert a disc to start playing. ClEANING THE UNIT Do not use volatile chemicals on this unit. ClEANING CD If the CD skips or will not play, the disc may need to be cleaned. Before playing, wipe the disc from the centre out with a cleaning cloth. [. . . ]