User manual AUDIOVOX CE101C

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] · When the battery voltage level is low, " " will light for approx. · Playback would automatically come to a stop when the batteries have no more power. Do not repeat pressing " " as the unit may operate incorrectly. ·" " would not be on if an AC adaptor is used. During play The track number of the current selection appears. When " " is press during play, total number of tracks on the disc will be displayed and the unit still on. If " " is pressed again the unit will be returned to full stop mode. The unit will be returned to full stop mode automatically after approximately 30 seconds if no button is played again within 30 seconds. Using on house current If the unit you purchased does not include an AC power adaptor, please use a 6V 350mA AC power adaptor. When the unit is not be used, be sure to disconnect the AC power adaptor. During pause The playing track number will flashes. PRECAUTION On safety As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing. Do not put any foreign objects in the safety slot inside the disc compartment. Do not put any foreign objects in the DC in 6V (external power input) jack. Should any solid objects or liquid fall into the unit, disconnect the power supply and have the unit checked by qualified personnel before operating it any further. When no disc is inserted onto the player and when " " is pressed, the display window shows " ". The unit cannot be operated when error message is displayed. 30 seconds the unit will return to full stop mode, or reset the player by pressing " " once and then insert a disc start playing. On operation Since the CD system offers a wide dynamic range, the peaks of the high level inputs are recorded with high fidelity, and the noise level is very low. Do not turn up the volume while listening to a part of the disc with no audio signals or very low level inputs. If you do, the speakers may be damaged when the peak level of the sound is played. If you do, the lens may be damaged and the unit will ot operate properly. VARIOUS PLAYING MODES During playback, every time the "PLAY MODE" key is pressed, the mode would be changed to the next one as follow : PROG (Program) play - Playing the selections in the desired order 1. [. . . ] To erase : When open the CD door including that program will be cancelled. 3. Pressing " " again will cease the "INTRO" play and continue playback in the NORMAL play mode. * "INTRO" play always starts from the first track. SPECIFICATIONS General Output (at 1KHz 0db level) Headphones / earphone (stereo minijack) 15 mW + 15mW at 16 to 32 Power requirements 2 size "AA" (LR6 or SUM-3) alkaline batteries; or DC in 6V, 350mA power adaptor Polarity of plug Dimensions Weight Operating voltage Approx. [. . . ]