User manual AUDIOVOX CE-100
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AUDIOVOX CE-100. We hope that this AUDIOVOX CE-100 user guide will be useful to you.
 |
Manual abstract: user guide AUDIOVOX CE-100
Detailed instructions for use are in the User's Guide.
[. . . ] With the three previous main considerations examined, you should now select the mounting area. Examine the mounting illustration and verify the selectedarea is suitable for drilling of the two bolt holes, wiring accessetc. Use the template provided to verify sufficient spaceexists on the mounting area to accept the unit. [. . . ] Observe cautions for possible interference in headliner or steel roof. holes through the fiberglass roof cap, the steel roof and headliner making certain the drill is 900 to the roof. Enlarge the 5/16" holes in the fiberglass roof to 1 3/8" dia. Assemble the two selected mounting bolts, cup washers, grommets, flat washers and jamb nuts to the steel roof using the wrench provided. Place housing below radio plate assembly and connect speaker wiring to radio wiring. 11. Insert the two 1 3/8" plugs in fiberglass headliner using sealant to insure water-proof seal. . Use universal template provided and locate on roof the desired mounting area. Observe cautions for possible interference in headliner or steel roof. holes through the fiberglass roof cap, the steel roof and headliner making certain the drill is 900 to the roof. Assemble the two selected mounting bolts, cup washers, grommets, flat washers and jamb nuts to the steel roof using the wrench provided. Place housing below radio plate assembly and connect speaker wiring to radio wiring. Use universal template provided and locate on roof the desired mounting area. Observe cautions for possible interference in headliner or steel roof. holes through the fiberglass roof cap, the steel roof and headliner making certain the drill is 90° to the roof. [. . . ] Locate the two wire (Red and Black) harness and the single Green/White stripe harness in this kit. Connect the Black wire to vehicle ground using the crimp-on ring terminal and screw included. Splice the Red wire to any + 12 volt accessorywire in the cab using the quick splice included. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AUDIOVOX CE-100
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AUDIOVOX CE-100 will begin.