User manual AUDIOVOX AVT1345

[. . . ] Color Television AVT1345 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE REFER SERVICICING TO QUALIFIED PERSONNEL. The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated " dangerous voltage" within the product' enclosure that may be of sufficient magnitude to s constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER' AUTHORITY TO OPERATE THE EQUIPMENT. S NOTE TO CATV INSTALLER THI REMINDER IS PROVIDED TO CALL THE CATV SYSTEM INSTALLER' ATTENTION TO ARTICLE 820S 40 OF THE NEC THAT PROVIDES GUIDELINES FOR PROPER GROUNDING AND, IN PARTICULER, SPECIFIES THAT THE CABLE GROUND SHALL BE CONNECTED TO THE GROUNDING SYSTEM OF THE BUILDING, AS CLOSE TO THE POINT OF ENTRY AS PRACTICAL. CAUTION The AC power cord provided with this product is polarized (one blade wider than the other). [. . . ] You will not need to res program the memory unless you change the type of cable or antenna connected to your TV. 10- Chapter 3: Operating your TV Changing Channels 1. The ù CH ü buttons will take you through all memorized channels, one by one. The ù CH ü buttons will not access channels that have not been programmed into the TV' memory. See the section, " s Programming Your TV's Channel Memory" on the previous page. The number buttons (0-9) will take you to any channel, even if it has not been memorized. To change to a channel enter it' number: the TV will tune to the new s channel when you enter the second digit of the channel. The PREVIOUS button will take you instantly to the last channel you were watching. Changing the Volume 1. To change the volume of the TV set, use the ÿ VOL ÷ buttons on the remote or on the front panel. To return the volume to its previous level, press MUTE again. Chapter 3: Operating Your TV-11 Changing the TV' Channel Memory s Your TV' channel determines the channels that are available using the ù CH ü buttons. If a channel is removed from memory you can tune to it with the ù CH ü buttons. If there is just one channel memorized, then the Add/Delete Channels function will search the whole channels. But if there are two or more channels memorized, then the Add/Delete Channels function will search the memorized channels only. Press the MENU button twice, then " Set Up" menu will display. Use the ù CH ü buttons to select " Add/Delete Channels" then use the ÿ VOL ÷ , button to enter the Add/Delete Channels"process. If the channel is not in memory, then use the ÿ VOL ÷ button to delete the channel from memory. If the channel is in memory, then use the ÿ VOL ÷ button to delete the channel from memory. If you are going to delete another channel, press the ù CH ü buttons until desired channel is selected. Wait 10 seconds or press the MENU button four times to exit. Displaying the Current Channel 1. To quickly see the current channel number and status, press DISPLAY button on the remote control The current channel number and status will be displayed. 12- Chapter 3: Operating Your TV Adjusting Video Settings You may wish to adjust the video settings (e. g. With the TV on, press the MENU button, then the " video" menu will appear. Use the ÿ VOL ÷ buttons to turn Settings to Preset or Custom. Use the ù CH ü buttons to select the video settings you wish to adjust. [. . . ] · Check that the antenna is connected, is in good working order, has no broken wires and is adjusted correctly. · Check that the antenna is connected, is in good working order, has no broken wires and is adjusted correctly. · Check that the antenna is connected, is in good working order, has no broken wires and is adjusted correctly. You can not tune to a cable channel · Make sure that the AIR/CABLE setting is correct. [. . . ]