User manual AUDIOVOX ADC400

[. . . ] all installation and operating instructions will be included with the NAV navigation module. Once the NAV is connected and operating properly, the NAV source mode will become active. While the NAV is not installed, the NAV option appears gray, indicating the function is not available. " Before accessing any camera features, you must purchase and install a rear video camera. [. . . ] Subject to technical changes Hardware Sub-menu Features If the rear-view video camera is connected, the unit is on, and the TFT monitor is retracted inside the unit, the TFT monitor automatically moves into the viewing position and Camera mode is selected upon shifting into REVERSE gear. the VME start scanning the available broadcasters (which take a while) 3. Once scanning is finished the 6 strongest ones will be stored at P1- P6 4. During Automatic Storing (AS) only the frequencys will be stored at P1- P6 to decrease the scanning/ storing time 5. If you now manually select P1- P6, then the PS information will be finally stored for the selected preset (i. Not all broadcaster support this additional information or all the time Preview Scan (PS) To scan the AM or FM band for a preview of available stations in your particular area, touch the 1/2 button to access the second screen of menu options touch the PS button (21). Subject to technical changes Local Radio Station Seeking (LOC) When the Local function is on, only radio stations with a strong local radio signal are played. To activate the Local function in AM/FM tuner mode, touch the 1/2 button to access the second screen of menu options, and then touch the onscreen LOC button. Adjustments at the Setup page Using of the on Screen buttons 1 To change the Source please use the SRC/Wide NAV button on the front of the VME head unit or at the remote control. DVB-T: Switch to Fullscreen Mode Search: Start searching for new channels Page - : Page down Page + : Page up CHDel: Channel delete System: DVB-T adjustement Broadcaster selection Subject to technical changes DVD/VCD VIDEO OPERATION NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays "PARKING" with a blue background. press the |<< button (17) on the remote control , the < button on the joystick (16) , or the |<< button on screen to move to the previous chapter. Goto Search During DVD or VCD playback, perform the following steps to use the GOTO feature to access a specific location on a disc: 1. VCD Track Search Time ­ Go to specific time in the current track Track ­ Go to specific track Enter a time into the field using the numeric keypad (29) on the remote control. Direct Chapter / Track Selection Remote Control Direct Entry During DVD, VCD and CD playback, you can use the numeric keypad on the remote control (29) to access a track directly. Subject to technical changes Touch Screen Direct Entry To select a chapter/track directly, touch the button on screen control to display the direct entry menu. Viewing an Alternate Picture Angle (DVD Only) Some DVDs contain scenes that have been shot simultaneously from different angles. for discs recorded with multiple angles , press the ANGLE button (13) on the remote control to toggle available angles of the on-screen image. Zooming Press the ZOOM button (23) on the remote control to enlarge and pan through the video image using the following options: "Q1", "Q2", "Q3", and "OFF". Multi-Language Discs (DVD Only) Changing Audio Language If you are watching a disc recorded in multiple languages, press the AUDIO button (5) on the remote control to choose a language. Changing Subtitle Language If you are watching a disc recorded in multiple languages with subtitles, press the SUBTITLE button (9) on the remote control to choose the language in which you would like the subtitles to appear. Subject to technical changes PBC (Play Back Control - VCD Only) For VCDs with play back functionality, play back control (PBC) provides additional controls for VCD playback. [. . . ] Never insert anything other than a 5" (12 cm) compact disc into the player as the mechanism can be damaged by foreign objects. Do not attempt to use a 3" (8 cm) CD-Single disc in this unit, either with or without an adaptor, as damage to the player and/or disc may occur. If such conditions occur, allow the interior of the vehicle to reach a normal temperature before using player. When the vehicle warms up during cold weather or under damp conditions, condensation may appear on the LCD panel. [. . . ]