User manual AUDIOVOX 1286428

[. . . ] Portable DVD Player with Color TFT LCD Screen D1800 USER'S MANUAL A BEFORE USING THE DVD PLAYER Important!Please read the following instructions before attempting to operate the DVD Player B Rain and Moisture Warning To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. 1 2 CAUTION: This unit employs a laser system. To ensure the proper use of the unit, read this manual carefully and keep it for future reference. To prevent direct exposure to the laser radiation, do not open the cabinet. [. . . ] A-B BUTTON: This button is used to mark a start location (A) and a stop location (B) for movie playback. Press this button once to mark the desired beginning point of the movie playback and a second time to mark the ending point. This will create a Loop and the unit will play the movie continuously from point (A) to point (B) until the A/B button is pressed again. ANGLE BUTTON: Some DVD discs have images with different screen angles, you may select among them, For example, when you watch a running train, you may select to watch it from the front, the right window or the left window without stopping it. This only works when there is an angle mark on the DVD and select "ON" status for angle mark in the GENERAL SET UP. TITLE BUTTON: Pressing the TITLE button will bring up the DVD's title screen. The majority of DVD's will allow a title selection and usually will permit selection at the next level down as well (e. g. , chapters). Some DVD's also permit you to select language and sound preferences in this screen. Once in the TITLE screen, use the scroll buttons to choose your preferences, and then press ENTER to confirm choices and close out the screen. P/N BUTTON: This button is used to select the video format for the DVD Player. DVD will be displayed on screen and the picture will appear a few seconds after. SET UP BUTTON: This button allows the user to select DVD options (Language, Video, Audio, Rating, Exit). The setup display can only be viewed when the player is in STOP mode. 19 33. INFRARED TRANSMITTER: The Infrared Transmitter sends the commands from the remote to the unit. 20 6. Connect the end of the supplied DC Power Adaptor cable to an AC wall outlet. Connect the other end of the supplied DC Power Adaptor cable to the 15V DC IN (DC IN) jack on the side of the D1800 jack. CONNECTING THE VIDEO IN/AUDIO IN JACKS The Audio/Video Input Jacks are used to connect any device with an Audio/Video Output function to the D1800 such as a High 8, VHS or DVD Player etc. . Connect one end of the supplied Audio/Video cable to all three off the color-coded Audio/Video Input Jacks on the back of the D1800 (Yellow=video, Red and White=audio). Connect the other end of the Audio/Video cable to the color-coded Audio/Video Output Jacks of the selected device. CONNECTING THE CAR CORD Connect one end of the supplied DC power adapter cable into the automobile lighter socket and the other end of the same cable into the DC IN 15V (Power in) jack on the side of the D1800. Connecting The Unit To An Automobile Power Source 21 CONNECTING THE D1800 TO A TV SET The Audio/Video Output Jacks are used to connect the D1800 to any TV/Monitor that is equipped with Audio/Video Input Jacks. Connect one end of the supplied Audio/Video cable to all three off the color-coded Audio/Video Output Jacks on the back of the D1800 (Yellow=Video, Red and White=Audio). Connect the other end of the Audio/Video cable to all three off the color-coded Audio/Video Input Jacks of the selected TV/Monitor. TV or Monitor Connection CONNECTING THE D1800 TO AN AMPLIFIER 1. [. . . ] Program Play To use the program play option, you must create a playlist of songs in the order you want them to play. NOTE: Once you begin adding songs from a folder to create your play list, you cannot add songs from a different folder. Choose the "PROG-END" option from the "PLAY" mode then press Enter to change the option to PROGRAM. Add songs to the program list by pressing "ENTER" once the song is highlighted. [. . . ]