User manual AUDIOVOX 1286055

[. . . ] Description of CS (Control Station) ® E LE C T RO N I CS C O R P. 3 1 4 MAIN POWER 1 2 CS 6 5 VOLUME 3 4 IR Control Station S 2 MAIN POWER 1 2 1. [. . . ] Once the indicator is blinking the Control Station will accept Infrared input command signals from an Infrared Remote Control device. To remove the Infrared Control function from the Control Station press and hold the button for 3 seconds. ­ If source indicator LED (3) is blinking the S1 position, the Control Station has selected to control the Audio/Video Input at Source 1. To change the sources, press the source SELECT button (2) to view the following sources. 3. Source Indicator LED ­ Indicates the video source that can will be viewed. Remote Sensor Eye ­ When the source indicator LED (3) is flashing, this indicates that the source equipment can be controlled remotely by pointing the remote control device at the remote device sensor. [. . . ] Adjust the volume to a low level before putting the headphones on. ) S1 S2 S3 S4 Installation from SDB to CS A/V SELECT OUTPUT STATION 5 AUDIO L R VIDEO L AUDIO SELECT OUTPUT STATION 2 AUDIO L R VIDEO L STATION 4 AUDIO R VIDEO L STATION 3 AUDIO R VIDEO STATION 1 AUDIO R VIDEO MASTER STATION AUDIO L R MONITOR 5 DC 12V MONITOR 4 DC 12V MONITOR 3 DC 12V MONITOR 2 DC 12V MONITOR 1 DC 12V STATION 5 CONTROLLER STATION 4 CONTROLLER STATION 3 CONTROLLER STATION 2 CONTROLLER L AUDIO 1 R VIDEO 1 L AUDIO 2 R VIDEO 2 A/V SOURCE INPUT L AUDIO 3 R VIDEO 3 L AUDIO 4 R VIDEO 4 POWER INPUT SIGNAL DISTRIBUTION BOX MODEL : SDB SDB ® FM MODULATOR DC 12V STATION 1 CONTROLLER MASTER CONTROLLER DIN CABLE, SDB TO CS (P/N:CSDIN) DC 12V FROM SDB45 POWER VIDEO (YELLOW) VIDEO (YELLOW) PICTURE SELECT AUDIO RIGHT (RED) AUDIO LEFT (WHITE) 3 HARNESS, SDB TO MONITOR S 4 CS VOLUME 2 1 IR MAIN POWER (P/N:CSSC) AUDIO RIGHT (RED) POWER OPTIONAL HEADPHONE AUDIO LEFT (WHITE) OPTIONAL AV MONITORS IR [. . . ]