User manual AUDIOVOX 1285867

[. . . ] OWNER'S MANUAL ACD-21 AM/FM/MPX RADIO WITH DETACHABLE FRONT PANEL, COMPACT DISC PLAYER AND QUARTZ CLOCK INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS This unit is designed for installation in cars, trucks, and vans with an existing radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialist shops. Always check the kit application before purchasing to make sure the kit works with your vehicle. [. . . ] Press the LOU button to activate this feature as indicated by LOUD on the display panel. Pressing the button again will de-activate the function and LOUD will disappear from the display. 3 2 AUDIO ATTENUATION (ATT) The audio mute function is performed using the ATT (attenuator) button. When the ATT button is pressed, the indication ATT appears on the display panel and the volume will be muted. Pressing the button for longer than 2 seconds will activate the Auto-Store Tuning feature. The radio will automatically scan the band in use and enter strong stations into the pre-set memory positions for that band. If you have already set the pre-set memories of that band to your favorite stations, activating the Auto-Store Tuning feature will erase those stations and enter the new strong stations. This feature is most useful when traveling in a new area where you are not familiar with the local stations. STATION PRE-SET MEMORIES To set any of the 6 pre-set memory buttons, use the following procedure: 1. Select the first station to be pre-set using the Manual Up/Down or Up/Down Seek Tuning functions 3. Press the pre-set button to be set and continue to hold the button in. The station is now set into the memory of that pre-set button and can be re-called at anytime by momentarily pressing that button. Repeat the above procedure for the remaining 5 pre-sets on the band in use and for the other 4 bands of the unit. bo bm. bn 7 LIQUID CRYSTAL DISPLAY PANEL The Liquid Crystal Display (LCD) panel displays the frequency, time, and activated functions. NOTE: It is a characteristic of LCD panels that, if subjected to cold temperatures for bp OPERATING INSTRUCTIONS an extended period of time, they may take longer to illuminate than under normal conditions. In addition, the visibility of the numbers on the LCD may slightly decrease. The LCD read-out will return to normal when the temperature increases to a normal range. DISC SLOT With the label surface facing up, gently insert the disc into the slot until the soft-loading mechanism engages and disc play begins. NOTE: This unit is designed for play of standard 5" (12cm) Compact Discs ONLY. Do not attempt to use 3" (8cm) CD-Singles in this unit, either with or without an adaptor, as damage to the player and/ or disc can occur. Such damage will not be covered by the Warranty on this product. next higher track number will be selected as shown on the display panel. Similarly , each time the Backward Track Select ( ) side of the button is pressed, the next lower track number will be selected as shown on the display panel. bq bt CUE/REVIEW FUNCTIONS ( / ) During disc play, high-speed audible search to any section of the disc can be made by the Cue and Review functions. Press and hold the Cue side of the button ( ) to advance rapidly in the forward direction, or the Review button ( ) to advance rapidly in the backward direction. During either function, the elapsed time within each track will automatically be shown on the display panel. br CD MODE SELECTOR (CD) AND PLAY/ ) PAUSE (CD/ When listening to radio with a disc loaded in on the display panel), press this the unit ( button to return to disc play mode from the beginning of the last track in play. [. . . ] Do not leave an ejected disc sitting in the disc slot as this can expose it to sunlight and other causes of damage. l When the vehicle warms up during cold weather or under damp conditions, moisture may condense on the lens of the disc player. Should this occur, the player will not operate properly until the moisture has evaporated. l The unit is designed with a vibration dampening CD mechanism to minimize interruption of disc play due to normal vibration in a moving vehicle. [. . . ]