User manual AUDIOVOX 1285626

[. . . ] PAV-1 AM/FM/MPX RADIO / MONITOR WITH CASSETTE PLAYER, CD CHANGER CONTROLS AND WIRELESS REMOTE CONTROL COMPACT DIGITAL AUDIO O WNER'S MA NUAL WARNING This product should ONLY be installed in accordance with this product's wiring instructions so that the monitor display will be disabled if the parking brake is not applied. The monitor section of this product should ONLY be operated while the transmission of the vehicle is in Park (or Neutral for manual transmission vehicles) and the parking brake is applied. INDEX Page Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 6 Remote Control Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 8 CD Changer Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Pressing the button when the display is at the maximum angle will return it to the closed position. NOTE:The front panel will automically return to the closed position when the ignition is turned off. bt DISPLAY ANGLE ADJUSTMENT ( These controls are used to adjust the picture quality during auxiliary video input modes. The Tint control will adjust the level of green or red in the picture. NOTE:The Color and Tint controls are not functional during AM/FM radio, tape and CD changer modes. The Brightness control is functional in these modes. bu DISPLAY RECALL (DISP) cl CASSETTE DOOR The Display Recall function is used to recall the function and volume setting display after they have disappeared from the screen during Auxiliary video input modes. Pressing the button will bring these displays back to the screen for 5 seconds. To access the cassette door, press the Eject button so that the panel drops to its lowered position (this function will operate when the unit is turned off if the ignition switch is "on"). Hold the DISPLAY BACKGROUND COLOR SELECTOR (BGCL) cassette with the exposed tape edge to the right and insert it fully This function is used to select the background color of the into the cassette door until the soft-loading mechanism draws -4- cq bs the cassette in and play begins (the TAPE , cassette symbol, PLAY and direction arrow will appear on the display panel). If the cassette being played requires Metal tape playback equalization, the setting will automatically be selected as indicated by MTL on the display panel. When the cassette reaches the end on the side of the tape being played, the unit will automatically change direction of play as shown by the arrow indications on the display panel. NOTE:Observe cassette operation cautions in Care and Maintenance section of this manual. ) FAST-FORWARD AUTOMATIC MUSIC SEARCH A momentary press of this side of the button will activate the Fast-Forward function which will cause the tape to rapidly move in the forward direction of play (FF and or will appear on the display panel). To stop Fast-Forward movement, press the Fast-Forward button again or the Program Selector and normal play will resume. Pressing and holding the Fast-Forward side of the button for longer than 2 seconds will activate the Fast-Forward Automatic Music Search function (AMS-F and or will appear on the display panel). The unit will automatically fast-forward to the beginning of the next selection and begin play. To stop Music Search function at any point, press the button again or the Program Selector and normal play will resume. cm FAST-FORWARD BUTTON ( ) REWIND AUTOMATIC MUSIC SEARCH A momentary press of this button will activate the Rewind function which will cause the tape to rapidly move in the reverse direction of play (REW and or will appear on the display panel). To stop Rewind movement, press the press the Rewind button again or the Program Selector button and normal play will resume. Each button on the remote control functions in the same way as the referenced button on the main unit. For optimal operation of the remote control, always aim it toward on the front panel of the main unit. the Remote Sensor 1 ON-OFF POWER ­ See Main Unit 1 2 VOLUME CONTROL (+ / -) ­ See Main Unit 2 3 AUDIO MUTE (MUTE) -pressing the button, the indication This button is used to mute the volume from the system. By 4 MODE / BAND SELECTOR (MODE) ­ See Main Unit 8 5 MANUAL UP/DOWN TUNING ( / ) ­ See Main Unit 9 AUTOMATIC SEEK TUNING TAPE PROGRAM SELECTOR CD CHANGER TRACK SELECT -7- cr MUT will appear on the display panel and the volume will be muted. Pressing the Mute button again or adjusting the Volume control will return to the volume level setting in use before the Mute function was activated. The Mute function is not available on the Main Unit. 9 ­ See Main Unit co ­ See Main Unit dl ­ See Main Unit 6 STATION PRE-SET TUNING ( 7 DISPLAY RECALL (DISP) 8 is pressed once, the RPT indication­will appear Repeatdisplay CD TRACK/DISC REPEAT (RPT) When the button on the panel and play of the selected track will be continually repeated until the Track Repeat mode is cancelled by pressing the Repeat button twice or activating the Track Scan function so that the RPT indication disappears from the display panel. [. . . ] "DOLBY" AND THE DOUBLE-D SYMBOL ( ) ARE TRADEMARKS OF DOLBY LABORATORIES LICENSING CORPORATION. -11- CARE AND MAINTENANCE The radio portion of your new sound system does not require any maintenance. We recommend you keep this manual for future reference of the many features found in this unit. As with any cassette player, the cassette section of this sound system does require a minimum of maintenance to keep it in good working condition. The following simple care and maintenance suggestions should be followed to prevent malfunctions of the cassette system. [. . . ]