User manual AUDIOVOX 0993000

[. . . ] Burn Up To 1500 MP3 and WMA Files onto a DVD+R /RW · Heat Management System - Forced Air Cooling to keep the chip sets operating at nominal temperatures · Subject to technical changes " Before accessing any navigation features, you must purchase and install the NAV module. all installation and operating instructions will be included with the NAV navigation module. Once the NAV is connected and operating properly, the NAV source mode will become active. While the NAV is not installed, the NAV option appears gray, indicating the function is not available. [. . . ] NOTE: Record the password and keep it in a safe place for future reference. the rating for each disc is marked on the disc , disc packing , or documentation. If the rating is not available on the disc, the parental lock feature is unavailable. Some discs restrict only portions of the disc and the appropriate content will play. If the rear-view video camera is connected, the unit is on, and the TFT monitor is retracted inside the unit, the TFT monitor automatically moves into the viewing position and Camera mode is selected upon shifting into REVERSE gear. When shifting into DRIVE gear, the TFT monitor is retracted back inside unit. Setting Camera In Options Normal Mirror On Off Manual The TFT panel automatically opens when the unit is turned on. When the ignition is turned OFF, the TFT panel DOES NOT retract if it was previously out. When the reverse driving stops, the monitor return to its original input mode. After entering calibration mode, a crosshair appears in a corner quadrant of the screen. Not all broadcaster support this additional information or all the time To scan the AM or FM band for a preview of available stations in your particular area, touch the 1/2 button to access the second screen of menu options touch the PS button (21). Time ­ Go to specific time in current title Title/Chapter ­ Go to specific time in a chapter Time ­ Go to specific time in the current track Track ­ Go to specific track During DVD, VCD and CD playback, you can use the numeric keypad on the remote control (29) to access a track directly. Enter a time into the field using the numeric keypad (29) on the remote control. Subject to technical changes Enter the desired chapter/track using the on-screen number pad. Some DVDs contain scenes that have been shot simultaneously from different angles. Press the ZOOM button (23) on the remote control to enlarge and pan through the video image using the following options: "Q1", "Q2", "Q3", and "OFF". Changing Audio Language If you are watching a disc recorded in multiple languages, press the AUDIO button (5) on the remote control to choose a language. If you are watching a disc recorded in multiple languages with subtitles, press the SUBTITLE button (9) on the remote control to choose the language in which you would like the subtitles to appear. During VCD playback, press the AUDIO button (5) on the remote control to choose between Left Channel, Right Channel, and Stereo. For VCDs with play back functionality, play back control (PBC) provides additional controls for VCD playback. press the MENU button (1) on the remote control to toggle the PBC function "On"/"Off". NOTE: When PBC is activated, fast forward, slow playback, and previous/next track are available. [. . . ] To provide a high-quality viewing experience on various platforms, for example, on mobile phones and DVD players. This device is able to play DivX® video files that have been recorded on CD-R/RW, DVD-R/RW and DVD+R/RW discs and USB sticks. You can obtain further information on DivX® video files and software tools at. Subject to technical changes GENERAL Unit will not power on Radio Fuse blown Car battery fuse blown Illegal operation Install new fuse with correct rating Install new fuse with correct rating Press the RESET button located in the bottom right corner of the front panel Replace battery with new one Remove battery and install correctly Check wiring and correct Increase volume level Review wiring diagram and check "MUTE" connection Replace speakers Adjust the channel balance to the center position Insulate all speaker wiring connections Use original copy Connect proper speakers Check speaker contact Check that the "MUTE" connection is not grounded and that it's properly insulated Check wiring and correct Battery depleted Battery installed incorrectly Improper audio output connection Volume set too low Improper "MUTE" connection Speakers damaged Heavily biased volume balance Speaker wiring is in contact with metal part of car Pirated disc is in use Speaker power rating not compatible with unit Speaker is shorted "MUTE" wire is grounded Incorrect connection between ACC and positive battery wire Tel-Mute malfunction Unit resets itself when engine is off TFT Auto Open is turned off Incorrect connection to parking brake wire PRK SW is activated, parking brake is not engaged Turn TFT Auto Open on Check wiring and correct Stop vehicle in safe place and apply parking brake DVD is not compatible with current TV system settings Change setup to accommodate disc Improper video signal connections Check wiring and correct Use correct aspect ratio setting Press OPEN key to restart monitor movement Monitor stops at incorrect position Moving path is blocked TUNER Weak station searching Auto antenna is not fully extended Auto antenna not properly connected LOCAL function is activated Disc is warped or scratched Disc is dirty or wet Laser pickup is dirty Incompatible disc is used Disc rating exceeds Parental Lock rating limit Disc region code is not compatible with unit Disc is inserted upside down Subject to technical changes Connect the auto antenna control cable properly Connect the auto antenna control cable properly Turn LOCAL function Disc does not play back Use disc in good condition Clean disc with soft cloth Clean laser pickup with cleaning disc Use compatible disc Change Parental Lock settings to lower restriction Use disc with proper region code Image blurred, distorted, or dark PCB cannot be used during No repeat or searching MP3 Interruption occurred during playback Use original disc PCB is not available on the disc PCB is on Turn PCB off Clean disc or replace Recreate disc with good files Message is longer than LCD can display Disc is being read Disc is dirty Disc is upside down Disc not present in loading compartment Disc is dirty Disc is upside down Disc format is not compatible with this unit DVD is not compatible with region code of unit Illegal mechanism operation Clean disc with soft cloth Insert disc with label side up Insert disc Clean disc with soft cloth Insert disc with label side up Press EJECT key for 5 seconds to reset loading mechanism Subject to technical changes Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor. [. . . ]