User manual AUDIO ANALOGUE PRIMO VT TUNER REV 2.0 REV1.0

[. . . ] the equipment has been projected and manufactured according to the Regulations of the Community 89/336/CEE and is marked CE. This equipment can't be used for different purposes other than those for which it has been manufactured. AUDIO ANALOGUE does not take any responsibilities for accidents or damages due to improper use of the equipment. WARNING Please do respect the safety standards contained in this manual before starting to operate the equipment. [. . . ] Please refer to "Radio stations storage" paragraph for further details about storage procedure. When the unit is in stereophonic mode, the STEREO LED turns green when the incoming signal is stereophonic, otherwise it stays off. Pressing this button when the unit is in normal mode tunes the radio on the station stored in the memory allocation that follows the last selected allocation. When the unit exits the Standby mode and when changing modulation type, pressing this button tunes the radio on the station stored in the 1st memory allocation. If no radio station is stored into the selected allocation, an EMPTY signal shows on the display and the radio switches back to the previous station. When in "Storage" mode, pressing this button allows choosing the memory allocation where to store the selected radio station. Please refer to "Radio stations storage" paragraph for further details about storage procedure. Please refer to "Stored Radio stations tuning" paragraph for further details about radio stations tuning. Pressing this button when the unit is in normal mode tunes the radio on the station stored in the memory allocation that precedes the last selected allocation. When the unit exits the Standby mode and when changing modulation type, pressing this button tunes the radio on the station stored in the 18th memory allocation. If no radio station is stored into the selected allocation, an EMPTY signal shows on the display and the radio switches back to the previous station. When in "Storage" mode, pressing this button allows choosing the memory allocation where to store the selected radio station. Please refer to "Radio stations storage" paragraph for further details about storage procedure. Please refer to "Stored Radio stations tuning" paragraph for further details about radio stations tuning. Left and Right out: please connect these outs to your integrated amplifier/preamplifier line inputs using a RCA interconnect cable. STANDBY TUNER: switches-on and switches-off of the device SEARCH +: the tuning frequency is increased of one step SEARCH - : the tuning frequency is decreased of one step SCAN +: the tuning frequency is increased to reach the first radio station which has a higher frequency than the one it started from; if this is not possible a complete scansion of the band is carried out and the present frequency is tuned again by just pressing the button. SCAN -: the tuning frequency is decreased to reach the first radio station which is has a lower frequency than the one it started from; if this is not possible a complete scansion of the band is carried out and the present frequency is tuned again by pressing the button. MEMORY+: for the description of this function refer to the front panel description. MEMORY-: for the description of this function refer to the front panel description. STORE: for the description of this function refer to the front panel description. If one of the items listed above is missing, please contact your Audio Analogue retailer. After extracting the smallest items from the package, pull out the unit carefully. [. . . ] If your used electrical or elctronic equipment has batteries or accumulator, please dispose of these separately before and according to local requirements. By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling. In other countries outside the EU If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal. For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you don't purchase a new product. [. . . ]