User manual ATIKA VT 32

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ATIKA VT 32. We hope that this ATIKA VT 32 user guide will be useful to you.


ATIKA VT 32 : Download the complete user guide (3585 Ko)

You may also download the following manuals related to this product:

   ATIKA VT 32 BROCHURE (989 ko)

Manual abstract: user guide ATIKA VT 32

Detailed instructions for use are in the User's Guide.

[. . . ] Do not operate machine before having read the operating instructions, understood all the notes and assembly the machine as described here. Declaration of conformity Extent of delivery Operating times Symbols machine Symbols used in the operating instructions Normal intended use Residual risks Security instructions Assembly Start-up Setting the work depth Working instructions Working with the thatcher Working with the lawn aerator Maintenance and care Transport Storage Guarantee Description of device / Spare parts Possible faults Technical data 16 16 16 16 16 16 16 16 19 19 20 20 20 21 21 21 22 22 22 23 24 Report any damage or missing items to your dealer, supplier or the manufacturer immediately. Before initiating the device please observe the provisions pertaining to corresponding laws (regional provisions) for the noise control. Shut off engine and remove power cord before performing cleaning, maintenance or repair work. [. . . ] While the motor is running, do not - lift or carry the device about - lift the impact guard Caution!Pay attention that the impact guard is closed or that the grass catching bag (optional accessory, if applicable) is attached. Turn off the device and wait until the drum has stopped when - tilting the thatcher - crossing areas not planted with grass - transporting the device to and from the work area Switch the machine off and remove the mains plug from the socket when - carrying out repair works - maintenance and cleaning - Removing malfunctions and blockages - transport and storage - Blade replacement 18 - leaving unattended (even during short interruptions) - When the thatcher begins to exhibit unusual vibrations - when you have hit an obstacle with the thatcher. Store unused equipment in a dry, locked place out of the reach of children. Check the machine for possible damage: - Before continuing to use the machine, the protective devices must be inspected to ensure that they work perfectly and with their intended function. All parts must be properly mounted and meet all conditions to ensure flawless operation. - Damaged guards and parts must be properly repaired or exchanged by a recognized, specialist workshop; insofar as nothing else is stated in the instructions for use. - Damaged or illegible safety warning labels should be replaced immediately. Maintain your thatcher / lawn aerator with care: - Ensure that all nuts, bolts and screws are tight. Design of the connection cable according to IEC 60245 (H 07 RN-F) with a core cross-profile section of at least - 1. The motor does not reach any longer its maximal power; the function of the device is reduced. Plugs and coupler outlets on connection cables must be made of rubber, non-rigid PVC or other thermoplastic material of same mechanical stability or be covered with this material. When running the connection line observe that it does not interfere, is not squeezed, bended and the plug connection does not get wet. Regularly check the extension cables and replace them if they are damaged. When working outdoors, only use extension cables especially approved and appropriately labelled for outdoor use. Only hook up the machine by means of a fault-current circuit breaker (30 mA). The electrical connection or repairs to electrical parts of the machine must be carried out by a certified electrician or one of our customer service points. Local regulations ­ especially regarding protective measures ­ must be observed. Repairs to other parts of the machine must be carried out by the manufacturer or one of his customer service points. Use only original spare parts, accessories and special accessory parts. [. . . ] to enable the growth of a healthy lawn in spring , the absorption of water , air and nutrients in the root area needs to be increased. We recommend aerating the lawn, depending on the condition, every 6 ­ 8 weeks. To achieve good results and to extent the life of the aerator drum, the lawn should be mowed before aerating (approx. Insert new springs (45) and install the drum again in the opposite sequence. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ATIKA VT 32




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ATIKA VT 32 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.