User manual ATIKA SBH 2100 BROCHURE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ATIKA SBH 2100. We hope that this ATIKA SBH 2100 user guide will be useful to you.


ATIKA SBH 2100 BROCHURE: Download the complete user guide (3867 Ko)

Manual abstract: user guide ATIKA SBH 2100BROCHURE

Detailed instructions for use are in the User's Guide.

[. . . ] Any other use than for vacuuming, blowing and shredding is not allowed. The garden vac/blower/shredder is only designed for private use in accordance with its proper purpose. Regarded as machine for private gardens and allotments are those units which are not employed in public grounds, parks, sports grounds, and in agriculture and forestry. The manufacturer accepts no liability for any damages resulting from improper use, and any risk is in this case borne solely by the user. [. . . ] Never operate the machine if other persons are in the immediate vicinity. The user is responsible for accidents with other people or their property. Only operate the machine with complete and correctly attached safety equipment and do not alter anything on the machine that could impair the safety. Do not spray machine with water (this is hazardous due to live components). Store the unused machine in a dry locked place away from the reach of children. Switch the machine off and remove the mains plug from the socket when - carrying out repair works - carrying out servicing and repair works, removal of faults - checking the leads to see whether these are caught up or damaged - changing over from vacuuming to blowing - transporting - leaving unattended (even during short interruptions) - unusual noises and vibrations Check the machine for possible damage - Before continuing to use the machine, the protective devices must be inspected to ensure that they work perfectly and with their intended function - Check whether the parts are damaged. All parts must be correctly installed and fulfil all conditions to ensure perfect operation of the saw - Damaged guards and parts must be properly repaired or exchanged by a recognized, specialist workshop; insofar as nothing else is stated in the instructions for use. - Damaged or illegible safety warning labels should be replaced immediately. Design of the connection cable according to IEC 60245 (H 07 RN-F) with a core cross-profile section of at least - 3 x 1. The motor will not be able to provide its maximum performance and the operation of the machine will be impaired. When laying the connecting attachments, be sure that they do get crushed or bent, and that the plug-and-socket connection does not get wet. Regularly check the extension cables and replace them if they are damaged. When working outdoors, only use extension cables especially approved and appropriately labelled for outdoor use. The electrical connection or repairs to electrical parts of the machine must be carried out by a certified electrician or one of our customer service points. Local regulations ­ especially regarding protective measures ­ must be observed. Repairs to other parts of the machine must be carried out by the manufacturer or one of his customer service points. Accidents can arise for the user through the use of other spare parts. The manufacturer is not liable for any damage or injury resulting from such action. The machine may only be operated by persons over the age of 16 years, and who have read and understood these operating instructions. Wear your safety gear (goggles/vizor, gloves) for protection from possible injuries. Be particularly aware of recoiling effects from brickwork or house walls. Before starting work, check the working area, and while working, beware of foreign bodies (e. [. . . ] Move the suction/blowing pipe in generous swaying movements uniformly a few centimetres over the ground, moving from one side to the other. Wash the bag when extremely soiled or at least once a year, by hand in mild soap suds. No mains power (power failure) Connection lead defect Check fuse (10 A) Replace lead or have lead checked (electrician) Never use defect lead Cleaning flap not closed (safety cutout Close cleaning flap triggered) To solve the problem, contact the Motor or switch defect manufacturer or an authorised company (see customer service list) Material is not sucked in properly (reduced Machine is clogged or blocked Clean inside of machine vacuuming power) Bag too full Empty bag Speed setting too low (only for garden Adjust to higher speed vacs with fully variable speed control) Extension cable too long, or cross- Extension cable at least 1, 5 mm2 , maximum 25 m long. The machine is guaranteed for a period of 2 years from the date of purchase/delivery against faults due to material or manufacturing errors. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ATIKA SBH 2100




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ATIKA SBH 2100 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.