User manual ATIKA PROFI 145 S BROCHURE

[. . . ] Pass the safety instructions on to all persons who work with the machine. Do not use the machine for unsuitable purposes (see "Normal intended use" and "Working with the agitator"). Wear personal protective equipment (gloves, safety goggles, face mask) when filling or emptying the mixing container. Keep children, bystanders and animals at a distance from your working area. [. . . ] Do not allow other persons, especially children, to touch the tool or the cable. Switch off the machine if persons, in particular children or pets, are close to you or if you change your working area. The operator is resposnible to third persons within the area of operations. The operator is responsible for accidents or risks which occur to other persons or their properties. Never operate the machine if other persons are in the immediate vicinity. Children and young persons under 16 years of age as well as persons who have not read the instruction manual are not allowed to operate this product. Only operate the machine with complete and correctly attached safety equipment and do not alter anything on the machine that could impair the safety. Switch the machine off and remove the mains plug from the socket when - carrying out repair works - maintenance and cleaning - eliminating faults. - unusual noises and vibrations Thoroughly maintain your agitator: - Make sure that the ventilation apertures are free. Check the machine for possible damage: - Before further use of the machine the safety devices must be checked carefully for their proper and intended function. all parts must be correctly installed and fulfil all conditions to ensure perfect operation of the machine. As you press more firmly on the button the rotational speed also increases. Use the agitator only in continuous mode with the agitator stand fitted. Before each use, check - Connection cables for defects (cracks, cuts, etc. With this type, the motor's speed and thus the agitator performance can be adjusted. If persons who have blood circulation problems are too often exposed to vibrations damages to the nervous system or to blood vessels may occur. You can reduce vibrations: - by thick and warm working gloves, - shorter working time (have longer breaks). See a doctor if your fingers swell, you don't feel well or your fingers become numb. The supplied spiral beater is suited for following materials: - Viscous and glutinous building compounds such as adhesives, paste, glue, knifing filler, plaster, tile cement etc. Immerse the beater through the material to be mixed until it is thoroughly mixed. This may result in overloading/overheating the motor as no sufficient cooling can be generated. Work with low speed when immersing the beater in the material to be mixed or pulling it out. [. . . ] This may result in overloading/overheating the motor as no sufficient cooling can be generated. Work with low speed when immersing the beater in the material to be mixed or pulling it out. Have the carbon brushes be replaced by the customer service if they are worn Regularly check the beater for damages for your own safety. Pull out power plug + Store unused equipment in a dry, locked place out of the reach of children. [. . . ]