User manual ATIKA KSL 2401-40 BROCHURE

[. . . ] Do not operate machine before having read the operating instructions, understood all the notes and assembly the machine as described here. Überprüfen Sie die Kettensäge auf offensichtliche Mängel wie - lose, ausgehängte oder beschädigte Sägekette - lose Befestigung - verschlissene oder beschädigte Bauteile Überprüfen Sie die Kettensäge nach jedem Gebrauch auf - Verschleiß, insbesondere Kette, Führungsschiene und Kettenrad. Operating times Extent of delivery Declaration of conformity Symbols on the chain saw Symbols Operating instructions Normal intended use Residual risks Security instructions - Personal protective clothing - Before sawing - Electrical safety - Operating - While sawing - Saw backstroke - General notes Assembly Before the first commissioning - Chain lubrication - Charging the oil tank Commissioning - Mains connection - Switching On/Off - Chain brake - Checking of chain brake - Clamping of saw chain Working with the chain saw Maintenance and cleaning - Maintenance - Sharpening of saw chain - Exchanging saw chain and sword - Chain wheel - Checking of the oil automatic - Cleaning Transport Storage Guarantee Possible faults Technical data Discription of chain saw / Spare parts 17 17 17 18 18 18 18 18 19 19 19 20 20 20 21 21 21 21 21 22 22 22 22 22 22 22 24 24 24 24 24 24 24 25 25 25 25 25 26 After unpacking, check the contents of the box That it is complete Check for possible transport damage Report any damage or missing items to your dealer, supplier or the manufacturer immediately. 1 chain saw 1 guide bar 1 saw chain 1 chain protection 1 operating instructions According to EC directive: 98/37/EC until 28. [. . . ] Never get in contact with the running saw with metallic fences or the ground. Make sure that the wood is free of foreign object (stones, nails etc). Note: Safety instructions - saw backstroke Use the claw stopper (16) for fixing the chain saw on the wood. Clamp the saw chain as described in paragraph , , Clamping of saw chain". Switch the machine off and remove the mains plug from the socket when - contact of chain saw with soil, stones, nails or other foreign substances check immediately chain and sword - carrying out repair works - maintenance and cleaning - removal of faults - cut through connection cables - checking of connection cables whether they are swallowed or damaged - transport - clamping again the chain - chain change - leaving of machine (also for short-term interruption) Maintain your chain saw with care: - Keep your tools sharp and clean in order to be able to work better and safer. - Comply with the maintenance instructions and the advices for lubrication and for the tool change. Check the machine for possible damage: - Before further use of the machine the protection devices or slightly damaged parts must be checked carefully for their proper and intended function. - Check whether the movable parts function perfectly and do not stick or whether the parts are damaged, All parts must be correctly installed and fulfil all conditions to ensure perfect operation of the chain saw. - Damaged guards and parts must be properly repaired or exchanged by a recognized, specialist workshop; insofar as nothing else is stated in the instructions for use. - Store unused equipment in a dry, locked place out of the reach of children. Do not carry out repair operations on the machine other than those described in section "Maintenance" but contact the manufacturer or authorized customer service centre. Repairs to other parts of the machine must be carried out by the manufacturer or one of his customer service points. Use only original spare parts, accessories and special accessory parts. Accidents can arise for the user through the use of other spare parts. The manufacturer is not liable for any damage or injury resulting from such action. Before the first commissioning Chain lubrication The chain saw is not delivered filled with saw chain adhering oil. Any use without chain saw oil may result in damage of the chain saw and guide bar. The durability and cutting power of the chain depends on the optimal lubrication. The guarantee expires when using oil which is not allowed for chain saws. 230 V with the mains voltage and connect the saw to the relevant and properly earthed plug. Use a shockproof plug, mains voltage 230 V with residual current circuit breaker (FI switch 30 mA). Check the saw chain tension before start of work after the first steps during sawing regularly all 10 minutes Only with a correct clamped saw chain and a sufficient lubrication you can influence the durability. [. . . ] Necessary repair works or maintenance works have to be carried out before the usage of the chain saw. A worn or damaged chain wheel reduces the durability of the saw chain and should therefore immediately be exchanged by the customer service. Check the function of the automatic chain lubrication by switching on the chain saw and holding it with the pike in direction of a carton or paper on the ground. If an increasing oil track is caused when checking it the oil automatic works faultless. [. . . ]