User manual ATIKA KSH 600.... BROCHURE

[. . . ] Before starting any repair, maintenance or cleaning work, always switch off the motor and remove the plug from the socket. According to the European Directive 2002/96/EC on electrical and electronic scrap, electrical devices that are no longer serviceable must be separately collected and brought to a facility for an environmentally compatible recycling. Nobody else should be in the working area of the machine other than the operator. Keep other persons or animals out of the danger area (minimum distance 5 m). [. . . ] Observing these instructions, and taking proper care, will reduce the risk of personal injury or damage to the equipment. Failure to observe the safety precautions can lead to injury to the operator or damage to property. Carelessness, failure to comply with the safety regulations and incorrect use can result in injuries to your hands and fingers when the splitting blade is moving. Impairment of hearing when working on the machine for longer periods of time without ear protection. In addition, in spite of all the precautionary measures taken, nonobvious residual risks can still exist. Check the machine for possible damage - Before continuing to use the machine, the protective devices must be inspected to ensure that they work perfectly and with their intended function - Check whether the movable parts function perfectly and do not stick or whether the parts are damaged. all parts must be correctly installed and fulfil all conditions to ensure perfect operation of the machine. - Damaged guards and parts must be properly repaired or exchanged by a recognized, specialist workshop; insofar as nothing else is stated in the instructions for use. - Damaged or illegible safety warning labels should be replaced immediately. Make sure that the oil tank cap is securely tightened to prevent oil from leaking during transport. Electrical connections must conform to IEC 60245 (H 07 RNF) with a cable cross-section of at least 230 V ~ 3 x 1. Never try to split logs containing nails, wire or other similar objects. Never place the hands on or near any moving parts of the machine when it is switched on. Maintain a safe distance from the log, the ram and the wedge in order to protect your hands from injury. The machine should only be used for splitting logs with a maximum length of 1050 mm. Check before splitting if the splitting column has been sufficiently lubricated to allow its trouble-free retraction and extension. Do not use any device where the switch can not be switched on and off. Damaged switches must be repaired or replaced immediately by the customer service. Lock in case of power (zero-voltage initiator) The equipment will switch off automatically if there is a power cut. Make sure that the motor turns in the correct direction (see motor arrow), because operation in the wrong direction damages the oil pump. switch on motor; the splitting blade automatically moves to the highest position. If the splitting blade is already in its highest position: grip both operating handles and push them down. [. . . ] We recommend the following hydraulic oils for the hydraulic cylinder: Shell Tellus T 22 Mobil DTE 11 Aral Vitam Gf 22 or equivalent BP Energol HLP 22 Do not use any other types of oil. The use of any other type of oil will adversely affect the operation of the hydraulic cylinder. Model / Type Splitting force Log length Log diameter Stroke Feed speed Return speed Hydraulic oil (max. Before each fault clearance: - switch off device - pull out main plug Logs are not being split The log is not positioned correctly. [. . . ]