User manual ATIKA KS 2201

[. . . ] 1 chain saw 1 sword 1 saw chain 1 chain protection 1 bottle of chain oil (100 ml) 1 operating instructions Before initiating the device please observe the provisions pertaining to corresponding laws (regional provisions) for the noise control. Shut off engine and remove power cord before performing cleaning, maintenance or repair work. When connecting cable is damaged or cut through immediately pull out the power plug. The chain saw is not suitable for forestry works (chopping and cutting off of perches in the forest). [. . . ] Only hook up the machine by means of a fault-current circuit breaker (30 mA). The electrical connection or repairs to electrical parts of the machine must be carried out by a certified electrician or one of our customer service points. Local regulations ­ especially regarding protective measures ­ must be observed. Repairs to other parts of the machine must be carried out by the manufacturer or one of his customer service points. Accidents can arise for the user through the use of other spare parts. The manufacturer is not liable for any damage or injury resulting from such action. 3 When assembling, pay attention that the chain links are lying correctly within the guide slot and on the chain wheel (13). Turn the chain clamp (22) anti-clockwise until the saw chain can easily be put around the chain wheel. Turn the chain clamp (22) clockwise until the saw chain is firmly clamped. Clamp the saw chain as described in paragraph , , Clamping of saw chain". Before the first commissioning Chain lubrication The chain saw is not delivered filled with saw chain adhering oil. + Never work - with stretched arms - on hardly accessible places - standing on a ladder, a staging or a tree. + Never get in contact with the running saw with metallic fences or the ground. + Switch off the chain saw between the cuts when several cuts are carried out. + If the saw chain jams in the wood switch off immediately the device and pull out the power plug. You can not see anymore details within the falling area ­ risk of accident. Support the trunk in such manner that the cut does not close and the saw chain jams. + Carry out longitudinal cuts with special care as the claw stopper is not used. + When working at a slope take always the position above or on the side of the trunk or the lying sawing material respectively. Always wear a helmet in order to protect yourself against perches falling down. Only those trees shall be chopped down which have a trunk diameter which is smaller than the length of the sword. Make sure that there are no persons or animals in the fall area (minimum distance 2 tree lengths). [. . . ] Clamp the saw chain as described in paragraph , , Clamping of saw chain". A worn or damaged chain wheel reduces the durability of the saw chain and should therefore immediately be exchanged by the customer service. To guarantee a long and reliable usage of the chain saws carry out the following maintainance works regularly. Check the chain saw for obvious defects such as - loose, hung out or damaged saw chain - loose fastenings - worn or damaged components Check the chain saw after each application for - wear, especially chain, sword and chain wheel. [. . . ]