User manual ATIKA HS 680-61 BROCHURE

[. . . ] Repair works may only be carried out by us or by a customer service agent nominated by us. The machine may not be used in a potentially explosive environment or be exposed to the rain. Even if used properly, residual risks can exist even if the relevant safety regulations are complied with due to the design determined by the intended purpose. Residual risks can be minimised if the "Safety information" and the "Intended usage" as well as the whole of the operating instructions are observed. [. . . ] The relevant accident prevention regulations for the operation as well as the other generally acknowledged occupational medicine and safety rules must be complied with. The manufacturer is not liable for any type of damage resulting from this: the user bears the sole risk. Wear protective clothing: - safety goggles Keep your workplace in an orderly condition!Take into consideration environmental influences: - Do not expose the hedge shears to the rain. - Do only work with sufficient visibility conditions - Do not use the hedge shears near inflammable liquids or gases. Do not allow other persons, especially children, to touch the tool or cable. Only operate the machine with complete and correctly attached safety equipment and do not alter anything on the machine that could impair the safety. Do not use any knives which do not comply with the indicated characteristics of this instruction manual. The use of other tools and other accessories can signify a risk of injury for you Switch the machine off and remove the mains plug from the socket when - carrying out repair works - carrying out servicing and repair works, removal of faults (including blocking of knives) - Transport and storage - Leaving of hedge trimmer (even during short interruptions) Maintain your hedge trimmer with care: - Keep the tools sharp and clean to be able to work better and more safely - Keep handles dry and free of oils and grease. - Follow the servicing instructions Check the machine for possible damage: - Before continuing to use the machine, the protective devices must be inspected to ensure that they work perfectly and with their intended function - Check whether the movable parts function perfectly and do not stick or whether the parts are damaged, All parts must be correctly installed and fulfil all conditions to ensure perfect operation of the hedge trimmer - Damaged guards and parts must be properly repaired or exchanged by a recognized, specialist workshop; insofar as nothing else is stated in the instructions for use. - Damaged or illegible safety warning labels should be replaced immediately. Before switching on, check always that wrenches and adjusting tools are removed. Store the unused machine in a dry locked place away from the reach of children. Design of the connection cable according to IEC 60245 (H 07 RN-F) with a core cross-profile section of at least - 1. When taking the connecting line take care that it does not disturb, is not squeezed, bended and the connection assembly does not get wet. Regularly check the extension cables and replace them if they are damaged. When working outdoors, only use extension cables especially approved and appropriately labelled for outdoor use. The electrical connection or repairs to electrical parts of the machine must be carried out by a certified electrician or one of our customer service points. Local regulations ­ especially regarding protective measures ­ must be observed. Repairs to other parts of the machine must be carried out by the manufacturer or one of his customer service points. Use only original spare parts, accessories and special accessory parts. Accidents can arise for the user through the use of other spare parts. [. . . ] Store unused equipment in a dry, locked place out of the reach of children. To extend the service life of the hedge trimmer and guarantee smooth operation, before storing for a longer period - thoroughly clean the hedge trimmer - treat all movable parts with an environmentally friendly oil Never use any grease!You may not start to operate the machine until you have read these operating instructions, observed all the instructions given and installed the machine as described!Scare animals off the hedge before starting to cut in order to prevent them from being injured. [. . . ]