User manual ATIKA GSCT 3,6 BROCHURE

[. . . ] Do not operate machine before having read the operating instructions, understood all the notes and assembly the machine as described here. Extent of delivery 13 Operating times 13 Declaration of conformity 13 Symbols on product / charger 14 Symbols operating instructions 14 Normal intended use 14 Residual risks 14 Security instructions 15 ­ Workplace safety 15 ­ Electrical safety 15 ­ Safety of persons 15 ­ Using and handling the power tool 16 ­ Using and handling the battery-operated product 16 ­ Service 16 Safety notes for battery-operated shrub and grass shears 16 Safety notes for charger 16 Safety instructions 16 Description of device / Spare parts 17 Before the first commissioning 17 ­ Charging the rechargeable battery 17 ­ Assembling the telescopic handle 17 Commissioning 17 Working instructions 18 Maintenance and cleaning 18 Changing the cutting tools 19 Storage 19 Guarantee 19 Disposal 19 ­ Removing the rechargeable battery 19 ­ Transport 19 Possible faults 20 Technical data 20 Before initiating the device please observe the provisions pertaining to corresponding laws (regional provisions) for the noise control. KG Schinkelstraße 97 59227 Ahlen - Germany herewith declare under our sole responsibility that the product Shrub and grass shear type GSC 3, 6 Shrub and grass shear type GSCT 3, 6 is conform with the above mentioned EC directives as well as with the provisions of the guidelines below: 2000/14/EG, 2004/108/EG and 2006/95/EG. Following harmonized standards have been applied: EN 60745-1:2009; EN 60745-2-15:2009 IEC EN 60335-2-94:2008; FprEN 60335-2-94:2009 in parts EN 50366:2003+A1:2006; EN ISO 10517:2009 Keeping of technical documents at: ATIKA GmbH & Co. [. . . ] A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. C) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. D) Under abusive conditions, liquid may be ejected from the battery; avoid contact. Is an increased risk of an electric shock when water penetrates into the charger. Do not operate the charger on combustible surfaces (such as paper, textiles). There is a risk of fire as the charger heats up during the charging process. Before each use, check the charger, charger cable and cable connector for damages. Have your charger only be repaired by qualified specialized personnel with genuine spare parts. Within his area of work the operator is responsible for third parties. Do not leave the power tool in direct sunlight and protect it against heat. Before starting the machine, make sure that your hands and feet are kept at a safe distance to the cutting tool. Be sure that the cutting tool already moves before you start cutting. Turn off the machine and wait until the cutting tool is stationary when: - the cutting tool comes into contact with soil, stones, nails or other foreign objects ( check whether the cutting tool/machine is damaged) - carrying out repair works - carrying out servicing and repair works, - removal of faults (including blocking of knives) - transporting and storage - leaving unattended (even during short interruptions) · Maintain the machine carefully: - Before continuing to use the machine, the protective devices must be inspected to ensure that they work perfectly and with their intended function - Damaged guards and parts must be properly repaired or exchanged by a recognized, specialist workshop; insofar as nothing else is stated in the instructions for use. - Damaged or illegible safety warning labels should be replaced immediately. Do not carry out repair operations on the machine other than those described in section "Maintenance" but contact the manufacturer or authorized customer service centre. Use only original spare parts, accessories and special accessory parts. Accidents can arise for the user through the use of other spare parts. The manufacturer is not liable for any damage or injury resulting from such action. A) Have your power tool serviced by a qualified repair person using only identical replacement parts. After completed charging, disconnect the charging cable connector (17) at first and then the charger from the mains. 364175 364176 364177 364181 364173 364174 364182 364172 Only use the telescopic handle together with the grass cutting tool to cut edges on the ground. Slide the wheel set (14) on the receiver (9) and fix it using the clamping screw (15). [. . . ] June and October April and August from May and then every 6 weeks Make sure that the knives do not come into contact with border and other stones or walls. To trim different working heights use the wheel set (partially optional). The unit can be adjusted to 3 working positions Push the switch (5) backwards. Clean the machine thoroughly after each application so that the faultless function is kept. [. . . ]