User manual ATIKA FOCUS 185

[. . . ] Wear face mask when working with the machine to protect the eyes from chips and splinters. Wear safety gloves when working with the machine to protect the hands from chips and splinters. Wear safety shoes when working with the machine to protect the feet from falling logs. Not observing this instruction can lead to injuries or cause damage to property. [. . . ] The machine may not be operated by children or young people under the age of 18. Never operate the machine if other persons are in the immediate vicinity. Only operate the machine with complete and correctly attached safety equipment and do not alter anything on the machine that could impair the safety. Do not spray machine with water (this is hazardous due to live components). Store the unused machine in a dry locked place away from the reach of children. Switch the machine off and remove the mains plug from the socket when - carrying out repair works - maintenance and cleaning work - checking connecting lines, whether these are knotted or damaged - removing faults - transporting - leaving unattended (even during short interruptions) Check the machine for possible damage - Before continuing to use the machine, the protective devices must be inspected to ensure that they work perfectly and with their intended function - Check whether the movable parts function perfectly and do not stick or whether the parts are damaged. all parts must be correctly installed and fulfil all conditions to ensure perfect operation of the machine. - Damaged guards and parts must be properly repaired or exchanged by a recognized, specialist workshop; insofar as nothing else is stated in the instructions for use. - Damaged or illegible safety warning labels should be replaced immediately. Electrical connections must conform to IEC 60245 (H 07 RN-F) with a cable cross-section of at least 400 V 3~ 5 x 1. 5 mm² for a maximum cable length of up to 10 m Never use the machine with a power supply cable of over 10 m in length. Never try to split logs containing nails, wire or other similar objects. Never place the hands on or near any moving parts of the machine when it is switched on. Maintain a safe distance from the log, the ram and the wedge in order to protect your hands from injury. The machine should only be used for splitting logs with a maximum length of 1300 mm. Check before splitting if the splitting column has been sufficiently lubricated to allow its trouble-free retraction and extension. Lock in case of power (zero-voltage initiator) The equipment will switch off automatically if there is a power cut. Make sure that the motor turns in the correct direction (see motor arrow), because operation in the wrong direction damages the oil pump. switch on motor; the splitting blade automatically moves to the highest position. If the splitting blade is already in its highest position: grip both operating handles and push them down. If the splitting blade does not move after the motor has started, switch off the motor and change the direction of rotation. You can change the direction by placing a screw-driver in the slot provided in the plug collar, and adjust the correct direction by moving to the left or right applying slight pressure. [. . . ] We recommend the following hydraulic oils for the hydraulic cylinder: Shell Tellus T 22 Aral Vitam Gf 22 BP Energol HLP 22 Mobil DTE 11 or equivalent Do not use any other types of oil. The use of any other type of oil will adversely affect the operation of the hydraulic cylinder. Model / Type Splitting force Log length Log diameter Stroke Feed speed Return speed Hydraulic oil (max. Before each fault clearance: - switch off device - pull out main plug Logs are not being split The log is not positioned correctly. [. . . ]