User manual ATIKA BIOQUICK 2500

[. . . ] The garden shredders are suitable for private use in gardens and allotments. As garden shredders for private gardens and allotments are considered such devices that are not applied in public facilities, parks, and sports facilities as well as in agriculture and forestry on a commercial basis. The intended usage also includes compliance with the operating, servicing and repair conditions prescribed by the manufacturer and following the safety instructions included in the instructions. The manufacturer is not liable for any type of damage resulting from this: the user bears the sole risk. [. . . ] In addition, in spite of all the precautionary measures taken, nonobvious residual risks can still exist. Before commissioning this product, read and keep to the following advice. Also observe the preventive regulations of your professional association and the safety provisions applicable in the respective country, in order to protect yourself and others from possible injury. Pass the safety instructions on to all persons who work with the machine. Machine including safety cut-out The safety cut-out, including an automatic motor brake, which is attached to the shredder is used for the safety of the machine, preventing the motor being started when the machine is open and the rotating knives could be 10 Do not leave the machine standing in the rain or use when raining. Switch the machine off and remove the mains plug from the socket when - Performing maintenance and cleaning work. If the machine's filling funnel or ejection slot is blocked switch off the motor and disconnect the mains plug before removing material from the filling funnel or ejection slot. Check the machine for possible damage: - Before further use of the machine the safety devices must be checked carefully for their proper and intended function. - Check whether movable parts function perfectly and do not stick or whether parts are damaged. all parts must be correctly installed and fulfil all conditions to ensure perfect operation of the machine. - Damaged safety devices and parts must be properly repaired or exchanged by a recognized, specialist workshop; insofar as nothing else is stated in the instructions for use. Store unused equipment in a dry, locked place out of the reach of children. Only hook up the machine by means of a fault-current circuit breaker (30 mA). The electrical connection or repairs to electrical parts of the machine must be carried out by a certified electrician or one of our customer service points. Local regulations ­ especially regarding protective measures ­ must be observed. Repairs to other parts of the machine must be carried out by the manufacturer or one of his customer service points. Accidents can arise for the user through the use of other spare parts. The manufacturer is not liable for any damage or injury resulting from such action. Do not place the equipment on ground which is paved or surfaced with gravel. Always maintain a safe distance (at least 2 m) from walls or other fixed objects. Before each use, check - Connection cables for defects (cracks, cuts, etc. Design of the connection cable according to IEC 60 245 (H 07 RN-F) with a core cross-section of at least - 1. [. . . ] - Switch machine off, disconnect mains plug, and clean interior of machine. Device starts but blocks Extension cable too long, or cross-section Extension cable at least 1. Socket too far from mains sup- longer cable is used, minimum cross-section 2. Model Name Motor Motor rating P1 S6 - 40 % Current consumption I ON/OFF-switch with Weight Sound pressure level at work LPA (measured to 2000/14/EC) Measured sound power level LWA (measured to 2000/14/EC) Guaranteed sound power level LWA (measured to 2000/14/EC) Max. [. . . ]