User manual ATIKA ADH 254 A BROCHURE

[. . . ] Do not operate machine before having read the operating instructions, understood all the notes and assembly the machine as described here. EC Declaration of Conformity 12 Extent of delivery 12 Characteristics noise values 12 Symbols machine / operating manual 12/13 Normal intended use 13 Residual risks 13 Safe working 13 Before the first start-up 15 Start-up 15 Working with the surface planing and thicknessing 16 machine Maintenance and cleaning 18 Transport 18 Storage 19 Guarantee 19 Maintenance and cleaning schedule 19 Description of device / spare parts 20 Possible faults 20 Technical data 21 Stand Installation tools Fasteners Operating manual After unpacking, check the contents of the box That it is complete Check for possible transport damage Report any damage or missing items to your dealer, supplier or the manufacturer immediately. EN ISO 3744 Machine used as surface planer and thicknesser with standard cutting blades. Noise power level No-load Load Planing Load Thicknessing LWA = 109, 5 dB(A) LWA = 112, 3 dB(A) LWA = 111, 3 dB(A) Sound pressure level at the workplace LpA = 93, 9 dB(A) LpA = 99, 3 dB(A) LpA = 97, 9 dB(A) KG Schinkelstraße 97 59227 Ahlen - Germany declare under our sole responsibility, that the device Surface planing and thicknessing machine type MBY10 / model ADH 254 A to which this declaration relates corresponds to the relevant basic safety and health requirements of the Directive 98/37/EC, and to the requirements for the other relevant Directives 2004/108/EG, 2006/95/EG and that the above-named machine agrees with the model, which received the EC type-examination certificate BM 60017295 0001 Notified body: TÜV Rheinland Product Safety GmbH Am Grauen Stein, 51105 Köln Notification number: 0197 The values given are emission values and must therefore not simultaneously represent safe workplace values too. [. . . ] Do not remove splinters, shavings and waste with your hands from the dangerous area of the blade shaft. Switch the machine off and remove the mains plug from the socket when - carrying out repair works - maintenance and cleaning - Fault elimination (this also includes removing of jammed shavings or splinters) - Checking connecting lines, whether these are knotted or damaged. - Transporting the machine - Changing the blades - Leaving the machine (also for short-term interruption) Maintain your machine with care: - Keep your tools sharp and clean in order to be able to work better and safer. - Follow the maintenance instructions and the instructions for tool exchange. Check the machine for possible damage: - Before further use of the machine the protection devices or slightly damaged parts must be checked carefully for their proper and intended function. - Check whether movable parts function perfectly and do not stick or whether parts are damaged. all parts must be correctly installed and fulfil all conditions to ensure perfect operation of the machine. - Damaged guards and parts must be properly repaired or exchanged by a recognized, specialist workshop; insofar as nothing else is stated in the instructions for use. Before switching on, check always that wrenches and adjusting tools are removed. Store unused equipment in a dry, locked place out of the reach of children. Extension cable to be designed in compliance with IEC 60 245 (H 07 RN-F) having a core cross-section of at least: - 1. The motor does not reach any longer its maximal power; the function of the device is reduced. Plugs and coupler outlets on connection cables must be made of rubber, non-rigid PVC or other thermoplastic material of same mechanical stability or be covered with this material. regularly check the cable and if damaged , have it renewed by a recognised skilled electrician. When running the connection line observe that it does not interfere, is not squeezed, bended and the plug connection does not get wet. Regularly check the extension cables and replace them if they are damaged. Only hook up the machine by means of a fault-current circuit breaker (30 mA). The electrical connection or repairs to electrical parts of the machine must be carried out by a certified electrician or one of our customer service points. Local regulations ­ especially regarding protective measures ­ must be observed. Make sure that the feed rollers and cutting tools are free from wood shavings and dust. Do only machine workpieces the dimensions of which are within the specifications for this machine (see "Technical data" on page 21). Ensure that you always comply with the safety instructions given on p. [. . . ] Screw in the clamping screws (34) using the delivered openend spanner (32). G1 - G2 If the nuts are not visible, carefully turn the blade shaft (47) using a waste wood block. - Firmly press the gauge onto the delivery table plate while making sure that the edge of the setting gauge is flush with the edge of the delivery table plate. Observe the following to maintain the operability of the machine: Do not wash down device with water. [. . . ]