User manual ASTAR LTV-1701 INSTRUCTION MANUAL

[. . . ] 9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. 10. Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles, and the point where they exit from the apparatus. 12. Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture , does not operate Normally, or has been dropped. [. . . ] If the TV still does not function properly, please refer to the troubleshooting section to diagnose the Problem. 3. * Please don't open the Cover 8 Connector lug CAUTION: Hold on to the connector lug when you unplug any one of the connectors Do not direct pull on the cord as it is prone to damage. -10- INSTALLATION ANTENNA -11- INSTRUCTION AV EQUIPMENT This TV provides 1 group of AV input, including one S-Videoand one group (YCbCr) for convenient connection to VCR, DVD or other video equipment. Please refer to the owner's manual of the equipment to be connected as well. You can use the AV and YCbCr input terminals on TV set rear as follows. VIDEO EQUIPMENT with YCbCr with terminal To audio outputs R W VIDEO EQUIPMENT Y Yellow (video) W White(audol L, mono input) R Red(audio R) Y To video output G B R Y W R G B R W R with S-video terminal VIDEO EQUIPMENT W R To S-VIDEO output To audio outputs You can also the S-VIDEO terminal if your video equipment has S-VIDEO. It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game or stereo system, etc. . . . . If your DVD player can output interlace and progressive mode signals , select the interlace output when connecting to component video input on your TV. Your TV can receive either 525i/60Hz or 625i/50Hz interlace signals. *Please keep AC cord unplugged when connecting TV system. -12- REMOTE CONTROL DESCRIPTION DESCRIPTION OF REMOTE FUNCTIONS 1. POWER:turn on or off the TV 2. NUMBER BUTTONS 3. VOL+/- :adjust volume 1 4. CH+/- :change program forward/backward 5. MENU: access main menu 6. BUTTONS / : move cursor in main menu 7. BUTTONS / : adjust item you selected 2 8. DISPLAY: recall program number, system etc on the screen 9. RETURN: return to the last viewed program 13 10. INPUT: select external video source 11. MUTE: mute sound 3 12. MTS :MONO/STEREO AND SAP 13. SLEEP: set time to turn off the TV 14. SYSTEM:shift frequency system(STD, HRC, IRC, AIR) 6 15. AUTO: auto adust the position and size of the 14 picture in PC mode 17. SOUND:3 sound mode. SPEECH STANDARD MUSIC 18. PICTURE:3 picture mode. SOFT STANDARD RICH POWER MUTE 11 INPUT VCR SLEEP AUTO 14 10 16 4 VOL MTS CH 12 MENU 5 RETURN SYSTEM 9 DISPLAY 8 SOUND PICTURE 18 DIRECT PROGRAM SELECTION (0-9 BUTTONS) 1. To select one-digit channel: Press 0-9 digit buttons and wait for 2 seconds. For example, you need channel 5, please input "5"button and the screen displays "5", the TV set goes to channel 5 in 3 seconds. 2. To select two-digit channel: Press two digit buttons in order to input the channel number. For optimum adjustment, the user is suggested to perform the Auto Setup is Windows "Full Screen" pattern. PRESET MODE(recommended resolution is 1280*1024@60Hz) RESOLUTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 V. Freq. (Hz) 70 70 60 72 75 56 60 75 72 60 70 75 60 65 H. Freq. (KHz) 31. 47 31. 469 31. 47 37. 86 37. 50 35. 156 37. 88 46. 88 48. 08 48. 36 56. 48 60. 02 63. 98 80. 00 Band Width(MHz) 28. 322 25. 175 25. 175 31. 5 31. 5 36 40 49. 5 50 65 75 78. 75 108. 00 135. 00 Polarity H/V -/+ +/-/-/-/+/+ +/+ +/+ +/+ -/-/+/+ +/+ +/+ 720*400 640*350 640*480 640*480 640*480 800*600 800*600 800*600 800*600 1024*768 1024*768 1024*768 1280*1024 1280*1024 -17- OPERATION INSTRUCTIONS PART II(VIDEO) TUNING PROCEDURE STEP 1 Turn on the TV. STEP 2 AUTO MEMORY 1. Press the MENU button on your TV (or remote controller) three times to enter TUNING menu. If it is in VIDEO/S-VEDIO/YCbCr /PC mode, it can't enter TUNING menu. Press Buttons to select "AUTO MEM. " then press button to automatically search and store all the signals in your area. broadcasting TV When presetting complete, the initial position number will reappear. 1 STD NOTE: You 'd better select the correct frequency system, color and sound system for the first channe before searching. In AIR mode, the set receives antenna signals; In STD/HRC/IRC mode the set receives Cable TV programs. Please select: AIR: If using VHF/UHF antenna. STD, HRC, IRC:If using Cable TV. TO SKIP A PROGRAM You may skip any program number by following the steps below: 1. Select the program number to be skipped by pressing CH+/CH- button or number button . 3. Press b uttons to select "ADD/ERASE", then select "ERASE" by b uttons. 4. When the skip is off, it indicates that this channel is not skipped. NOTE: If the chann el is skipped, you can't obtain it by CH+/CH-. But you can get it by u sing NUMBER KEY(0-9). STEP 3 FINE TUNING If signal is weak, the fine tuning is necessary. Press buttons until the best possible picture and sound are obtained. NOTE: You can execute these operations only if a tuner box is connected to the TV. -18- OPERATION INSTRUCTIONS SELECT COLOUR SYSTEM If the colour system setting is incorrect, the colour will be abnormal. [. . . ] If there is still no picture, press the Adjustment Control button several times. If step 2 doesn't work, connect your PC system to another external CRT. If your PC system functions properly with a CRT TV but it does not function with the LCD TV, the output timing of the VGA card may be out of the LCD's synchronous range. Please change to an alternative mode listed in the Standard Timing Table or replace the VGA card, and then repeat steps 1 and 2. If you have chosen an output timing that is outside of the LCD TV's synchronous range (Horizontal:24~61KHz and Vertical: 56~75Hz), the OSD will display a "Out of Range" message, Choose a mode that is supported by your LCD TV. [. . . ]