User manual ASKO W6461 QUICK START GUIDE

[. . . ] The power must be on before you can open the door, set the programs or start the machine. Door Open Button The power must be on and you must press this button to open the door. Please note that the water must be drained before the door will open. Start/Stop Button Once you've selected the program and options, press this button to start the washer. [. . . ] (See below. ) "00" on the LED indicates no program has been selected. Remaining Time Indication ­ When you select a program, the LED displays the estimated program time based on the time the program ran previously. As the program progresses, the LED displays the remaining program time. The time is displayed as the hours followed by an "h" and the minutes, e. g. , 1h12. Options Temperature Press this button until the temperature you desire displays on the LED. The options are 85°, 105°, 120°, 140°, 160°, 175°, and 205° F. A "C" on the LED indicates the wash temperature will be cold. The Wool and Hand/ Delicate programs can only be set for cold, 85° F or 105°F. The Perma Press, Wool, and Hand/Delicate programs cannot be set to spin above 800 rpm. You can also select No Spin/No Drain by pressing the button until "no d" displays. Press this button until the number of hours you wish to delay starting the washer displays on the LED then press Start. The indicator light next to the button stays lit when this option is on. The normal water level for an ASKO is just below the bottom of the glass door. [. . . ] (Refer to your Use and Care Guide for more details. ) If you choose to use a liquid detergent, start out with a very small amount, such as one or two tablespoons. Fabric Softener ­ We recommend that you use only 2 tablespoons of fabric softener. [. . . ]