User manual ASKO 1555

[. . . ] Auto Wash The dishwasher has sensors that detect the level of soil on the dishes and adjust the water consumption and temperature accordingly. Heavy Wash (Cold, 85° ­ 170° F/Sani) For the heaviest soiled loads, such as casseroles or sauce pans. Normal Wash (Cold, 85° ­ 170° F) For normally soiled loads, such as plates, glasses, bowls, and lightly soiled pans. [. . . ] Mixed Wash Designed to wash heavily soiled dishes in the lower basket and lightly soiled dishes in the upper basket. Delicate Wash (Cold, 140° F) For delicate items, such as fine china and crystal, that are washed immediately after use. Quick Wash (Cold, 85° ­ 140° F) For lightly soiled loads that are washed immediately after use. This program can also be used for delicate items, but you should dry the dishes without heat. Rinse and Dry (120° F) Rinses the dishes with hot water then activates the fan and heating element to dry them. OPTIONS Once you have selected a program, you can change some of the program features by using the options (described below). To select an option, simply press the Menu button until the option you desire displays, then press the Set button until the desired setting displays. You can continue to make programming changes or press Start/Stop to start the program. Delayed Start This option allows you to delay starting the dishwasher from 1/2 hour to 24 hours. Press the Menu button until Delayed Start displays, then press Set until the number of hours you wish to delay starting the dishwasher displays along with a flashing clock symbol. Cool Touch This option lets you set a cool-down cycle after the drying program. Press Menu until Cool Touch displays, then press Set once to select On or twice to select Off. Refer to your Use and Care Guide for details. START/STOP BUTTON Once you have selected the wash program and options, press this button to start the dishwasher. (Make sure the door is securely closed. ) The indicator light around the button will glow progressively as the program goes through each cycle. When the program is complete, the light will glow all the way around the button. INTERRUPTING A PROGRAM TO ADD AN ITEM If you want to interrupt a program to add an item, open the door slightly until the spray arms stop turning. You can then open the door fully and place the item into the dishwasher. The water is hot and you could get scalded. CHANGING OR STOPPING A PROGRAM If you decide to change the program after you have started the machine, press the Start/Stop button for three seconds. You will have to select the program and options again when you are ready to restart the program. (Note: If the program has already gone through the wash cycle, you will have to add detergent. ) CHILD-SA. E BUTTON LOCK To prevent a child from accidentally starting the dishwasher or changing the program settings, the dishwasher can be programmed not to start unless two buttons are held down simultaneously. [. . . ] (Note: If the program has already gone through the wash cycle, you will have to add detergent. ) CHILD-SA. E BUTTON LOCK To prevent a child from accidentally starting the dishwasher or changing the program settings, the dishwasher can be programmed not to start unless two buttons are held down simultaneously. Refer to your Use and Care Guide for instructions on how to activate this feature. END-O. -PROGRAM SIGNAL The dishwasher emits a short signal at the end of the program. Refer to your Use and Care Guide for instructions on how to adjust the volume or to deactivate the signal. DISHWASHING DETERGENT AND RINSE AID We recommend that you use only unscented, granular automatic dishwashing detergent. [. . . ]