User manual ASKO 12605
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ASKO 12605. We hope that this ASKO 12605 user guide will be useful to you.
Manual abstract: user guide ASKO 12605
Detailed instructions for use are in the User's Guide.
[. . . ] This allows you to reduce the temperature and yet obtain as good a result as if you had used a higher temperature for the shorter period. The Economy button + lower washing temperature reduces pollution.
Detergent
Using more detergent does not improve the washing performance, but merely imposes an extra load on the environment. Try reducing the amount of detergent you use, and increase it only if the results are unsatisfactory. Open the door by pressing
If the door does not open, see below.
The control panel
Program control knob
The program control knob must be turned clockwise only.
Program options
Thermostat knob
Knob for centrifugations spin speed
Indicating lamp
Lights to show that the power is turned on.
Safety device
Ensures that a child cannot change the temperature setting. [. . . ] Adding it for program 1 will mean that it is rinsed away with the prewash water. If you are using a detergent ball or dosing bag, load it with the washing and select programs 2, 3 or 4.
Fabric conditioner compartment
For best washing performance, only use low sudsing detergent.
Clean the detergent compartment regularly Fabric conditioner
Pour the fabric conditioner into the insert in the left-hand compartment. Follow the instructions on the container, but do not fill to above the level of the syphon lip. If you do, the syphon will immediately discharge the conditioner into the main or pre-wash and degrade washing performance.
1. When finished, select program 10 to pump the water out of the machine.
5
5. Chose cenrtifugations spin speed. . .
What the figures on the program knob mean
9 Wool program 9. Start wool 10 Pumping out
Which program should I choose?
You can naturally select a standard program or, by combining your preferred temperature setting, program and option selection, produce a program to suit your requirements. Long spin
*
Fabric care label Type of fabric Fill Pro- Option gram button Temperature Time, minutes
White Cottons with pre-wash White Cottons without pre-wash Fast colors *** White Cottons Fast colors + Economy Quick wash Synthetics colours, white Quick synthetics *
1 2 2 2 2 3 6 7 7 9 E
60-95° 110-125 60-95° 85-110 40-60° 75-85 40° 40° 40° 40° 40° 75 95 50 50 40
68 Synthetics 6. The door can be opened only when the pointer is against a mark.
** When you choose program 2 (6) the knob advances directly to 3 (7). The machine still performs all stages of program 2 (6) .
Superquick
Quick Wash program
The machine has a special Quick Wash program, which saves both time and energy. If the load is small, you can also press the button and speed the program up even more. The machines starts and works through the stages shown below.
If you change your mind . and want a different program:
Turn the program knob and program selector to the required positions, and choose the temperature you want
. or want to interrupt the program
Turn the program knob to10 to make the machine pump out. If you add more washing and restart the machine, check that there is detergent left in the detergent compartment.
Remember turn the program knob clockwise only.
Points to note:
· The Wool program cannot be modified by the option buttons, except for
(no spin).
· The main wash water is always cooled by the admission of cold water before pumping out in order to prevent risk of scalding, shrinking and wrinkling. · Before starting to spin, the machine checks that the load is evenly distributed in the drum. If not, it redistributes the load by turning at normal drum speed and then makes another attempt to start spinning.
Waterconsump-tion, lit.
Automatic operations:
Pre-wash Main wash 3 rinses Spin 2 rinses
*
Appr. kWh
* Time use figures are based on inlet
cold water 20°C, inlet cold water 60°C.
Energy use figures includes use of hot water.
80 73 73 73 73 39 39 39 36 65
1, 1-1, 7
** This program is ideal for small,
0, 8-1, 5
slightly soiled loads, which only need freshening. For best results, use only 1/3 of the normal recommended dosage of detergent.
0, 5-0, 8 0, 5 0, 6 0, 3 0, 3 0, 3 0, 3 0, 6
*** Programme used for AU Energy Rating Label Acc. to AS2040, dry load 4, 5 kg
The machine finishes these programs with a short spin. [. . . ] Load the washing and close the door firmly.
2 4 6 8
Open the door by pressing
Pour detergent and fabric conditioner into the detergent compartment. Turn the program knob to the required program, and the machine will start.
Select any program options.
If you change your mind . and want another program, turn the program knob to the required position. When restarting the machine, check there is still detergent in the detergent compartment.
When the machine has stopped:
* Open the door by pressing * When a program finishes with water still in the machine, turn to 10 and the machine pumps out the water. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ASKO 12605
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ASKO 12605 will begin.